NEWMEN Wheelset 27,5 "| 650B Evolution E.35 Aluminum Gen2 | BOOST
With this wheelset, you can finally use your E-MTB as you want, because all components are extra reinforced and adapted to the much higher loads. The stable aluminum rim with 35 mm inner width corresponds exactly to the dimensions of the NEWMEN Evolution SL A.35 test winner rim.
For the higher loads during E-MTB use, the wall thicknesses of the Evolution EG35 rim in the nipple area and on the side walls were additionally increased, which further improves the resistance to dents by 40%.
With the Gen2 hubs, you no longer need to worry about adjusting the axial bearing clearance. The long-life bearings are already stress-free and precisely pressed in at the factory. This evolution has resulted in a high level of user-friendliness. The time saved you can spend better on your favorite trail.
The e-bike version uses only larger, double sealed bearings with a special lubricant. In addition, more material was used at neuralgic sites to compensate for the larger loads and to avoid defects and a 17mm axle provides excellent rigidity.
With the extra-reinforced pulley freewheel, all teeth are fully in use at all times and thus prevent the dreaded kick into the void, which can certainly occur under high loads in pawl systems.
All Newmen products are developed and produced in Germany. Thus, the manufacturing process can be optimized at any time and a permanently high quality can be guaranteed.
intended use : MTB E-Bike, Tour, All Mountain, Trail
Impeller size: 27.5 "| 650B (ETRTO: 584 x 35 mm)
Rim type: clincher (wire and folding tire)
Brake type: only for disc brake
Brake disc mount: 6-hole (IS2000)
Material: aluminum, steel
Inner width: 35 mm
External width: 39 mm
Rim height: 21 mm
Number of holes: 28 holes
axle type front: 15x110 mm thru-axle BOOST
axle type back: 12x148 mm thru-axle BOOST
Front bearing : 2x industrial deep groove ball bearings
Rear bearing : 4x industrial deep groove ball bearings
Seal: labyrinth rubber seals
Freewheel Compatibility: 8-, 9-, 10-, 11-speed MTB Shimano | SRAM or 11-, 12-speed SRAM XD
Freewheel type: 2 toothed washers, 30 detents
Spokes: Sapim Strong Straightpull (black)
tubeless capable: yes
Recommended tire width: 57-89 mm
maximum system weight: 180 kg (driver, bike, clothing and possibly luggage)
Finish: Shotpeen Black Anodized
Color: black with gray logos
Weight according to the manufacturer: from 2054g
Weight weighed by yourself:
Scope of supply: 1x NEWMEN wheelset 27,5 "| 650B Evolution E.35 aluminum Gen2 | BOOST