NEWMEN rim 29 "Evolution EG35 aluminum e-bike | 32 holes
Super stable rim for the hardest use.
The basis of this rim are the superlight and very stable NEWMEN EVOLUTION SL rims. The additionally reinforced rim profile and the extremely solid rim flanges of the EVOLTION EG make them even more resistant to bumps and dents.
The Dellen resistance of the EG35 is again 40% better than the already very solid SL A.35. Of course, the NEWMEN EVOLUTION EG35 also have a completely edge-free outer contour and flared rim flanks which give the tire a rounder shape and thus give even more cornering grip.
The rim profile of the e-bike rim with the straight nipple support surface is specially designed for the use of specially developed washers (MG Washer) and ensures very high "spoke pull out" values, with low wall thickness in this area. The rim flanges, on the other hand, are considerably more solid and therefore more robust and resistant compared to rims of the same weight category.
The perfect rim for a wide, light and fast e-bike or Gravity wheelset for tire widths from 2.35 "to 2.8".
intended use : All Mountain, Trail, Enduro
Material: 6XXX aluminum
Rim type: clincher (wire and folding tire)
Brake type: only for disc brake
EARTH: 590 mm
Inner width: 35 mm
External width: 39 mm
Rim height: 23 mm
Offset: 0 mm (symmetrical)
Number of holes: 32 holes
tubeless capable: yes
Recommended tire width: 57-89 mm
maximum tire pressure: not specified
maximum system weight: 180 kg (e-bike), 140 kg (gravity) (driver, bike, clothing and possibly luggage)
maximum spoke tension: 1200N
Features: MG washer
Finish: Shotpeen Black Anodized
Color: logos gray
Weight: 650g (manufacturer)
Delivery: 1x Newmen Evolution EG35 aluminum rim, without MG washer
Note: The special washers (MG Washer) needed to build an impeller
must be ordered separately and are not included! For the e-bike use
Newmen recommends the use of Sapim Strong (2.3-2.0) spokes.
Instructions Newmen Rims D | EN | FR | IT | ESP | RU