NEWMEN Rear Hub E-Lution Straightpull E-Bike Gen2 | 12x148mm thru-axle BOOST | SRAM XD
Also in the 2nd generation the Newmen Hubs will find many fans again. If you are looking for a lightweight, yet reliable rotor hub, you will hardly miss it. With the Gen2 hubs, you no longer need to worry about adjusting the axial bearing clearance. The long-life bearings are already stress-free and precisely pressed in at the factory. This evolution has added a high level of usability. The time saved you can spend better on your favorite trail.
The e-bike version uses only larger, double sealed bearings with a special lubricant. The grease used by Newmen offers 25% more water absorption and a very high bleed temperature, which protects bearings from premature wear and corrosion. In addition, more material was used at neuralgic sites to compensate for the larger loads and to avoid defects and a 17mm axle provides excellent rigidity.
With the extra-reinforced pulley freewheel, all teeth are fully in use at all times and thus prevent the dreaded kick into the void, which can certainly occur under high loads in pawl systems.
All Newmen hubs are developed and produced in Germany. Thus, the manufacturing process can be optimized at any time and a permanently high quality can be guaranteed.
intended use : Cross Country to Downhill, E-Bike
Material: aluminum 7075
axle type : 12x148mm thru-axle BOOST
Number of holes: 28 holes
Brake disc mount: 6-hole (IS2000)
Freewheel compatibility: 11-, 12-speed SRAM XD
Freewheel type: 2 toothed washers, 30 detents
bearing : 4x industrial deep groove ball bearings
Seal: smooth-running sliding seals, double sealed
Spoke Type: Straightpull (straight)
Spoke tension: 1200 Nm
maximum system weight: 120 kg (driver, bike, clothing and possibly luggage)
Color: black with gray decals
Weight according to the manufacturer: 250g
Weight weighed: 254g
Scope of supply: 1x NEWMEN Rear Hub E-Lution Straightpull E-Bike Gen2 | 12x148mm thru-axle BOOST | SRAM XD
EAN: 4054571140005 | MPN: 90400