NEWMEN front hub MTB FADE Straightpull Center Lock silver | 15x110mm thru-axle BOOST
The FADE front hubs will also find many fans again. If you are looking for a light, yet resilient wheel center, you can hardly avoid them. You don't have to worry about adjusting the axial bearing clearance here either. The durable bearings are press-fitted precisely and precisely from the factory. This further development has gained a high degree of user friendliness. You can spend the saved time better on your favorite trail.
Of course, only high-quality, double-sealed industrial bearings with a special lubricant continue to be used. The grease used by Newmen offers 25% more water absorption and a very high bleeding temperature, which protects the bearings from premature wear and corrosion.
Despite the relatively low weight, safety was not spared. It is better to use a little more material in critical areas, such as. For example, at the transition between the brake disc and spoke holder, as a risk of a defect.
Newmen is so convinced of the FADE hubs that they are also approved for e-bike use.
All Newmen hubs are developed and produced in Germany. This means that the manufacturing process can be optimized at any time and a consistently high quality can be guaranteed.
intended use : cross country to downhill, e-bike
Material: aluminum 7075
axle type : 15x110 mm thru-axle Boost
Number of holes: 28 holes
Brake disc mount: Center Lock
bearing : 2x industrial deep groove ball bearings
Spoke type: Straightpull (straight)
Spoke tension: 1200 Nm
maximum system weight: 120 kg (driver, bike, clothing and possibly luggage)
Weight according to the manufacturer: 100g
Weight weighed: 109g
Scope of delivery: 1x NEWMEN front hub MTB FADE Straightpull Center Lock silver | 15x110mm thru-axle BOOST