Also in the 2nd generation the Newmen Hubs will find many fans again. If you are looking for a lightweight, yet reliable rotor hub, you will hardly miss it. With the Gen2 hubs, you no longer need to worry about adjusting the axial bearing clearance. The long-life bearings are already stress-free and precisely pressed in at the factory. This evolution has resulted in a high level of user-friendliness. The time saved you can spend better on your favorite trail. The e-bike version uses only larger, double sealed bearings with a special lubricant. The grease used by Newmen offers 25% more water absorption and a very high bleed temperature, which protects bearings from premature wear and corrosion. In addition, at neuralgic sites more material was used to compensate for the larger loads and to avoid defects.
All Newmen hubs are developed and produced in Germany. Thus, the manufacturing process can be optimized at any time and a permanently high quality can be guaranteed.
intended use : Cross Country to Downhill, E-Bike Material: aluminum 7075 axle type : 15x110 mm thru-axle Boost Number of holes: 28 holes Brake disc mount: 6-hole (IS2000) bearing : 2x industrial deep groove ball bearings Seal: smooth-running sliding seals, double sealed Spoke Type: Straightpull (straight) Spoke tension: 1200 Nm maximum system weight: 120 kg (driver, bike, clothing and possibly luggage) Color: black with gray decals
Weight according to manufacturer: 150g Weight weighed: 150g
Scope of supply: 1x NEWMEN front wheel hub E-Lution Straightpull E-Bike Gen2 | 15x110mm thru-axle BOOST