MCFK wheelset 27.5 "| 650B MTB Carbon Clincher 25mm inner width | DT Swiss 240s Straightpull hubs
Mcfk Mtb 25mm rim
Light, stable and beautifully crafted carbon rim from the lightweight specialist from Leipzig. This rim offers an exclusive and impeccable UD carbon look, which is available in a matte finish.
With classic rim flanges, it is suitable for all wire and folding tires. Due to the monocoque construction, the rim is completely laminated and hardened in one piece. Thus, weak points are excluded from the outset. Laminated, instead of traditionally drilled spoke holes, provide continuous fibers, thus for added stability and avoid spoked tears. The asymmetric design of the rim allows a more even spoke tension, which further increases the rigidity of the entire impeller. With its enormous width of 25 mm inside and 35 mm outside, this rim offers enough space even for wide tires up to 60 mm wide. Lower air pressures can be easily driven without lifting the tires from the rim. These are the best conditions for more comfort and traction.
DT Swiss 240s Straightpull 6-hole / Centerlock hub
Switzerland is known for good chocolate, first-class cheese and miracles of precision mechanics. The love of detail that these products bring to life can also be found in the DT Swiss 240s hubs. The tried and tested, and with 18 teeth finely toothed pulley freewheel, is extremely reliable and need hardly shy from the comparison to the Swiss clockwork. The bearing technology with 2 bearings each for freewheel body and hub body is adapted to the loads occurring. The labyrinth sealing system, along with grinding seals, as well as bearing rings made of stainless steel ensure a long service life. DT Swiss constantly improves its own products. The goals are extreme reliability and, of course, lightweight construction. In the mechanics of the hubs, however, the development department reached its limits. Lighter, with consistent reliability, seems hardly possible. As potential for improvement, however, the spoke flanges were identified. By using straight spokes - Straightpull - the load on the spokes is lowered and the risk of spoke breaks is reduced to a minimum.
Sapim CX-Ray spokes
Sapim CX-Ray spokes are so-called knife spokes. The middle part is butted during production to 1.5 mm diameter and flat forged in the last step. These processes provide a solidification of the structure and produce extremely durable spokes.
intended use : Cross Country, Trail, All-Mountain
Impeller size: 27.5 "(ETRTO: 584 x 25 mm)
Rim type: clincher (wire and folding tire)
Brake type: only for disc brake
Brake disc holder: 6-hole (IS2000) or centerlock
Material: UD Carbon Pregreg
Inner width: 25 mm
External width: 35 mm
Rim height: 29 mm
Number of holes: 28
Einspeichmuster: front 3-fold crossed | crossed at the back 3 times
axle type forward: 12x100 mm plug axis (TA12), 15x100 mm plug axis (TA15) or 15x110 mm boost plug axis axle type rear: 12x142 mm plug axis (X-12) or 12x148 mm boost plug axis
Front bearing : stainless steel bearing
Rear bearing : stainless steel bearing
Seal: labyrinth rubber gaskets
Freewheel Compatibility: 8-, 9-, 10-, 11-speed Shimano / SRAM or 11-, 12-speed SRAM XD
Freewheel type: 2 toothed pulleys, 18 latches (ratchet system)
Brake disc sizes: ns
Spokes: Sapim CX-Ray, Straightpull (straight)
tubeless capable: yes
Recommended tire width: up to 60 mm
maximum rider weight: 125 kg (driver, bike, clothes and possibly luggage)
Finish: Carbon UD matt
Color: logos black / white, hub: black / red
Weight: 1374g (manufacturer)
Scope of supply: 1x MCFK wheelset 27.5 "| 650B MTB Carbon Clincher 25 mm inner width | Tune Swiss 240s Straightpull hubs
Note: The impeller is shown with Tune hubs. It is of course supplied with DT Swiss 240s Straightpull hubs.
MCFK rim Road Carbon | DE
DT Swiss 240s hub | DE