MCFK front wheel 29 "MTB Carbon Clincher 25 mm inner width | DT Swiss 240s hub
Mcfk Mtb 25mm rim
Light, stable and beautifully crafted carbon rim from the lightweight specialist from Leipzig. This rim offers an exclusive and impeccable UD carbon look, which is available in a matte finish.
With classic rim flanges, it is suitable for all wire and folding tires. Due to the monocoque construction, the rim is completely laminated and hardened in one piece. Thus, weak points are excluded from the outset. Laminated, instead of traditionally drilled spoke holes, provide continuous fibers, thus for added stability and avoid spoked tears. The asymmetric design of the rim allows a more even spoke tension, which further increases the rigidity of the entire impeller. With its enormous width of 25 mm inside and 35 mm outside, this rim offers enough space even for wide tires up to 60 mm wide. Lower air pressures can be easily driven without lifting the tires from the rim. These are the best conditions for more comfort and traction.
DT Swiss 240s J-Bend 6-hole / Centerlock hub
Hubs from DT Swiss enjoy the reputation of being almost indestructible. Thanks to high-quality industrial bearings made of stainless steel and effective seals, the 240s are the source of this reputation. Just unpack, install in the bike and forget. The hubs are designed to be extremely user-friendly, so there is no need to adjust the bearing clearance and the maintenance intervals are only required at very long intervals. Should a service be necessary after tens of thousands of kilometers, thanks to the DT Swiss plug-in system, the hubs can be disassembled and maintained within a few minutes without special tools. The tried and tested flange geometry forms the perfect basis for durable and stiff wheels.
Sapim CX-Ray spokes
Sapim CX-Ray spokes are so-called knife spokes. The middle part is butted during production to 1.5 mm diameter and flat forged in the last step. These processes provide a solidification of the structure and produce extremely durable spokes.
intended use : Cross Country, Trail, All-Mountain
Impeller size: 29 "(ETRTO: 622 x 25 mm)
Rim type: clincher (wire and folding tire)
Brake type: only for disc brake
Brake disc holder: 6-hole (IS2000) or centerlock
Material: UD Carbon Pregreg
Inner width: 25 mm
External width: 35 mm
Rim height: 29 mm
Number of holes: 28 holes
axle type : 12x100 mm plug axis (TA12), 15x100 mm plug axis (TA15), 15x110 mm boost plug axis
bearing : stainless steel bearing
Seal: labyrinth rubber gaskets
Spokes: Sapim CX-Ray, J-bend (bent)
tubeless capable: yes
Recommended tire width: up to 60 mm
maximum system weight: 125 kg (driver, bike, clothes and possibly luggage)
Finish: Carbon UD matt
Color: logos black / white, hub: black
Weight: 682 g (manufacturer), 390 g (only rim), 145 g (hub, manufacturer)
Scope of supply: 1x MCFK front wheel 29 "carbon clincher 25 mm inner width | DT Swiss 240s hub
Note: The impeller is shown with Tune hub. It is of course delivered with DT Swiss 240s hub.
MCFK rim MTB Carbon | DE
DT Swiss 240s hub | DE