MAXXIS tires Minion DHR II 29 x 2.60 WT 3C MaxxTerra TR EXO +
Are you ready for the next departure ...
Contrary to the sounding name, it is not a ride on the cannonball - With its all-new tread design, the Minion DHR II is the ideal tire for aggressive gravity rides.
With the side lugs of the legendary DHF, which were used for even more cornering a bit, he has a great traction there. The center lugs are beveled to allow for better acceleration and braking. The cut profile in the longitudinal direction, the turning in high-speed curves is a breeze.
Wide Trail Casing (WT)
This special carcass design optimizes the profile layout and tire shape on today's wider wheel rims. Traditional tires are designed for narrow rims and get on square wheels too angular shape and thus not exactly optimal performance.
WT tires are optimized for an inner rim width of 35 mm, but work perfectly on all rims with an internal dimension between 30 and 40 mm.
Tubeless Ready (TR)
tube loose tires have many advantages: you can drive with less air pressure. This gives better traction and reduces rolling resistance. And where there is no tube , the breakdown risk also decreases. MAXXIS TR tires are better prepared for installation with sealant than other "tubeless ready" tires. The bead of our TR tire is like a real UST tube tackle completely coated with a rubber layer. As a result, tube assembly on all rims with standard dimensions is already successful on initial inflation and with little liquid.
Even "normal" MAXXIS MTB tires can be mounted like other tubeless tires with sealant as the carcass fabrics are very dense.
Officially released for tubeless assembly and guaranteed by MAXXIS are only the new MAXXIS TR models. Tubeless mounting of other models is at your own risk.
Note: We strongly advise against the use of ammonia-containing sealant. Ammonia has been shown to attack the carcass and, depending on the amount used, can weaken up to 30% after a few months.
EXO + Protection
Maxxis new EXO + construction combines two of the best puncture resistant materials: SilkShield and EXO. The SilkShield layer surrounds the entire tire from bead to bead, the EXO layer is mounted on the sidewalls. Together, the EXO + offers the following benefits: 27% better puncture protection on the tread, 51% more stable sidewall, 28% more puncture protection compared to the proven stable EXO carcass.
Tires with EXO + protection are designed for aggressive trail riding and enduro racing and are perfectly suited for the higher torque and weight that occur with E-MTBs.
3C MaxxTerra is the best three-ply rubber compound for our Enduro and Freeride tires. Smooth running uphill, as well as best grip downhill, characterize this mixture as well as a long life.
Tire Type: Folding Tire (Clincher)
intended use : MTB
Size (inches): 29x2.6
Size (ETRTO): 66-622
Execution: Wide Trail Casing (WT), EXO + Protection, Tubeless Ready (TR)
Rubber compound: 3C MaxxTerra
Carcass: 120 TPI
tubeless capable: yes
Compatibility E-bike: yes, for e-bikes up to 25 km / h
Profile: optimized for rear wheel
recommended air pressure: 2.5 to 3.4 bar (35-50 PSI)
recommended rim width: optimal for 35 mm, also 30-40 mm width possible
Maximum load: not specified
Weight: 1035g (manufacturer) The weights of the tires may vary due to production!
Scope of supply: 1x MAXXIS tires Minion DHR II 29x2.6 WT 3C MaxxTerra TR EXO +
EAN: 4717784034171 | MPN: 2637