MAXXIS tires Minion DHR II 29 x 2.40 WT 3C MaxxGrip TR EXO+
With a completely new profile design, the Minion DHR II is the ideal tire for aggressive gravity driving. With the side lugs of the legendary DHF, which have been slightly widened for even better cornering support, it has extreme cornering support. The center lugs have beveled lugs for better acceleration. Notches on the lugs improve the transition when turning into corners. Part of the center knobs have a paddle shape, they dig in under hard braking and help keep the bike under control.
Manufacturer's Notes: Maxxis strongly discourages the use of sealant containing ammonia. Ammonia has been shown to attack the carcass and, depending on the amount used, can weaken it by up to 30% after just a few months. Maxxis recommends using Tire Plasma tire sealant.
Wide Trail Casing (WT)
This special carcass construction optimizes the profile layout and tire shape on today's wider rims. Traditional tires are developed for narrow rims and get a too square shape on wide rims and thus a less than optimal performance. WT tires are optimized for an internal rim width of 35 mm, but work excellently on all rims with an internal dimension between 30 and 40 mm.
Tubeless Ready (TR)
tube tires have many advantages: you can drive with less air pressure. This gives better traction and reduces rolling resistance. And where there is no tube , the risk of punctures is also reduced. Maxxis TR tires are better prepared for installation with sealant than other "tubeless ready" tires. The bead of the Maxxis TR tires is completely covered with a layer of rubber, just like a real UST tubeless tube . As a result, tube installation is successful for all rims with standard dimensions the first time you pump it up and with little liquid.
The well-known 3C downhill compound, which many of the best downhillers have trusted for years, is now called 3C MaxxGrip. 3C MaxxGrip offers the ultimate grip and cushioning properties for unrivaled downhill traction.
The new EXO+ construction is based on a 60 TPI carcass coated with a new abrasion-resistant rubber. A rubberized EXO puncture protection layer is located in the sidewalls and a short butyl insert is incorporated over the tire bead. T he EXO+ technology has almost twice as much puncture protection and 20% more puncture protection than the EXO construction and thus ranks pretty much between EXO and DD (Double Down). Tires with EXO+ Protection are built for aggressive trail riding and enduro racing, and are especially designed for the higher torque and weight of E-MTBs.
Tire type: folding tires (clincher)
intended use : MTB
Size (inches): 29 x 2.40
Size (ETRTO): 61-622
Design: Wide Trail Casing (WT), EXO+, Tubeless Ready (TR)
Rubber compound: 3C MaxxGrip
Carcass: 60 TPI
tubeless capable: yes, tubeless ready
E-bike compatibility: yes, up to 25 km/h
Profile: optimized for the front wheel
recommended air pressure: 35 - 50 PSI | 2.5 - 3.4 bars
Recommended inner rim width: optimal for 35 mm, 30 - 40 mm width also possible
Maximum load (per tire): not specified
Weight according to the manufacturer: 1120g
Weight weighed: kA
Note: The weights of the tires may vary due to production!
Scope of delivery: 1x tire MAXXIS Minion DHR II 29 x 2.40 WT 3C MaxxGrip TR EXO+