Description
MAXXIS tires Minion DHR II+ 27.5 x 2.80 3C MaxxTerra TR EXO+
Are you ready for the next descent...
Contrary to the catchy name, it's not a ride on a cannonball - with its completely new tread design, the Minion DHR II is the ideal tire for aggressive gravity rides.
With the side lugs of the legendary DHF, which have been slightly widened for even more cornering hold, it has great traction there. The center knobs are beveled to allow better acceleration and braking. The cut profile in the longitudinal direction makes turning into high-speed curves child's play.
Tubeless Ready (TR)
tube tires have many advantages: You can drive with less air pressure. This gives better traction and reduces rolling resistance. And where there is no inner tube , the risk of punctures is also reduced. MAXXIS TR tires are better prepared for mounting with sealant than other "tubeless ready" tires. The bead of our TR tires is completely covered with a rubber layer like a real UST tubeless tube . As a result, tube installation is successful for all rims with standard dimensions the first time you pump it up and with little liquid. "Normal" MAXXIS MTB tires can also be mounted tubeless with sealant like tires from other manufacturers, as the carcass fabric is very dense.
However, only the new MAXXIS TR models are officially approved for tubeless assembly and guaranteed by MAXXIS. The tubeless assembly of other models is at your own risk.
Note: We strongly advise against the use of sealant containing ammonia. Ammonia has been shown to attack the carcass and, depending on the amount used, can weaken it by up to 30% after just a few months.
EXO+ Protection
Maxxi's new EXO+ construction combines two of the best puncture protection materials: SilkShield and EXO. The SilkShield layer wraps the entire tire from bead to bead, the EXO layer is mounted on the sidewalls. Together, the EXO+ results in the following advantages: 27% better puncture protection on the tread, 51% more stable sidewall, 28% more puncture protection compared to the proven, stable EXO carcass. Tires with EXO+ Protection are designed for aggressive trail riding and enduro racing and are ideal for the higher torque and weight that e-MTBs experience.
Note: In 2022 there will be a "running change" procedure for Maxxis tires with EXO+ carcass. Unfortunately we have no influence on when which tire will be delivered in which version and ask for your understanding.
The EXO+ carcass has been revised and is now even more robust. The revised version uses a 60 TPI carcass instead of 120 TPI. The Silkshield is omitted, the EXO sidewall protection has been reinforced and a butyl insert on the bead has been added. The weight is 1 to 5% higher.
3C MaxxTerra
3C MaxxTerra is the optimal three-layer rubber compound for our enduro and freeride tires. Ease of movement uphill and the best grip downhill characterize this mixture as well as a long service life.
Technical specifications:
Tire type: folding tires (clincher)
Area of intended use : MTB
Size (inches): 27.5 x 2.80
Size (ETRTO): 71-584
Design: EXO+ Protection, Tubeless Ready (TR)
Rubber compound: 3C MaxxTerra
Carcass: 120 TPI
tubeless capable: yes
E-bike compatibility: yes, up to 25 km/h
Profile: optimized for the rear wheel
recommended air pressure: 1.2 to 2.5 bar (17-35 PSI)
Recommended inner rim width: 24.5-50 mm
Maximum load: not specified
Color: Black
Weight according to the manufacturer: 1065g
Weight weighed: 1072g
Note: The weights of the tires can vary due to production!
Scope of delivery: 1x MAXXIS tire Minion DHR II+ 27.5 x 2.80 3C MaxxTerra TR EXO+
