MAXXIS tires IKON 29 x 2.60 WT 3C MaxxTerra TR EXO
The Ikon + extends the range of the most versatile XC tire to the Plus platform.
With cleat sizes and heights optimized for the larger volume and lower air pressure of the Plus Bikes, this tire provides even greater safety and predictable handling in a variety of ground conditions due to the significantly increased footprint. On rocks and roots, even when it's wet, the 3C MaxxTerra rubber compound convinces. For very coarse, rocky terrain, this IKON has the EXO-Protection design, which safely protects the side walls with little extra weight.
Wide Trail Casing (WT)
This special carcass design optimizes the profile layout and tire shape on today's wider wheel rims. Traditional tires are designed for narrow rims and get on square wheels too angular shape and thus not exactly optimal performance.
WT tires are optimized for an inner rim width of 35 mm, but work perfectly on all rims with an internal dimension between 30 and 40 mm.
Tubeless Ready (TR)
tube loose tires have many advantages: you can drive with less air pressure. This gives better traction and reduces rolling resistance. And where there is no tube , the breakdown risk also decreases. MAXXIS TR tires are better prepared for installation with sealant than other "tubeless ready" tires. The bead of our TR tire is like a real UST tube tackle completely coated with a rubber layer. As a result, tube assembly on all rims with standard dimensions is already successful on initial inflation and with little liquid.
Even "normal" MAXXIS MTB tires can be mounted like other Tubeless tires with sealant as the carcass fabrics are very dense.
Officially released for tubeless assembly and guaranteed by MAXXIS are only the new MAXXIS TR models. Tubeless mounting of other models is at your own risk.
Note: We strongly advise against using ammonia-containing sealant. Ammonia has been shown to attack the carcass and, depending on the amount used, can weaken it by up to 30% after only a few months.
This extremely cut and abrasion resistant material protects the sidewall of various MTB tires. It is very tightly woven, light and very flexible. As a result, the performance of the tires remains convincingly good.
3C MaxxTerra is the best three-ply rubber compound for our Enduro and Freeride tires. Smooth running uphill, as well as best grip downhill, characterize this mixture as well as a long life.
Tire Type: Folding Tire (Clincher)
intended use : MTB
Size (inches): 29 x 2.60
Size (ETRTO): 66-622
Execution: Wide Trail Casing (WT), EXO Protection, Tubeless Ready (TR)
Rubber compound: 3C MaxxTerra
Carcass: 120 TPI
tubeless capable: yes
Compatibility E-bike: yes, for e-bikes up to 25 km / h
Profile: for race, rocks and roots, hard as well as loose soil
recommended air pressure: 2.5 to 3.4 bar (35-50 PSI)
recommended rim width: optimal for 35 mm, also 30-40 mm width possible
Maximum load: not specified
Weight: 760g (manufacturer) The weights of the tires may vary due to production!
Scope of supply: 1x MAXXIS tire IKON 29 x 2.60 WT 3C MaxxTerra TR EXO
EAN: 4717784033310 | MPN: 2645