MANITOU Suspension Fork 27,5" Mezzer Pro 180 mm | BOOST 44 mm Offset tapered black matte

MANITOU suspension fork 27.5 "Mezzer Pro 180 mm | BOOST 44 mm offset tapered black matt

Equipped with unprecedented functions, the Mezzer Pro offers enough handling and control to master even the most demanding enduro rides. Thanks to the 37 mm stanchions and the reverse fork bridge (Reverse Arch), the Mezzer Pro is the stiffest fork in its category. Depending on whether your trail bike needs to be brought up to date or your enduro damper needs a suitable counterpart, the Mezzer Pro can be engraved in 10 mm increments from 180 (delivery status) to 140 mm using the included spacer.
In addition, the fork has a sensitive adjustable low and high speed compression levels and rebound damping. Smooth-running SKF dust seals improve the response behavior on light terrain and ensure that no dirt gets inside the fork. A hydraulic "puncture protection" (HBO) increases the progression and thus prevents unwanted damage when walking hard. Together with the fully adjustable air spring and Manitous IRT (Infinite Rate Tune) system, the Mezzer Pro is the ultimate enduro fork.


Dorado Air
This suspension was originally developed for the Dorado downhill forks, it offers ultimate sensitivity with a self-balancing negative air spring. When the fork is inflated, both the positive and negative air chambers are filled at the same time to balance the pressure and create an incredibly smooth suspension feel.

MC² damper
The closed damper cartridge offers a variety of adjustment options to meet all requirements with separate settings for high and low-speed compression. In addition, the new cartridge has a bladder and thus ensures even more uniform damping under the toughest driving conditions.

Infinite Rate Tune (IRT) system
IRT is a secondary air chamber that allows you to set the middle stroke of the fork regardless of the initial stroke.

HBO
A function known from the Dorado is HBO (Hydraulic Bottom out). The externally adjustable HBO enables the driver to set higher progression in the last quarter for jumps regardless of compression set-up, spring pressure or driver weight.

HexLock SL2
The HexLock SL2 thru-axle system offers you incredible performance and enormous stiffness with low weight.


Technical specifications:

intended use : Enduro
E-bike ready: n / a
Impeller size: 27.5 inches
Fork crown / shaft material: Deep-Hollow Forged aluminum / aluminum
Material stanchions: 7057 aluminum, black anodized
Standpipe diameter: 37 mm
Immersion tube material: aluminum
axle type : 15 x 110 mm BOOST plug axis (HexLock SL2)
Steerer: 1.5 "to 1 1/8" tapered
Steerer tube length: approx. 265 mm
Travel: 180 mm (adjustable to 140 mm in 10 mm increments)
Spring system: Dorado Air
Adjustment of the spring characteristic: yes, with IRT system (air spring)
Damping: MC2, high speed compression, low speed compression, low speed rebound
Lockout: without
Installation height: 574 mm (with 180 mm travel)
Brake mount: Postmount (180 mm)
Max. permissible brake disc size: 220 mm
Tire diameter max .: not specified
Tire width max .: 2.6 inches (with Mudguard), 2.8 inches (without Mudguard)
Offset: 44 mm
Color: black matt

Weight according to the manufacturer: 2000g
Weight weighed:


Scope of delivery:

1x MANITOU suspension fork 27.5 "Mezzer Pro 180 mm | BOOST 44 mm offset tapered black matt
1x Hexlock SL2 thru axle
1x Mudguard with fastening screws
4x 10 mm travel spacers