MANITOU suspension fork 27.5" | 29" Dorado Pro 203 mm | 20x110mm BOOST 47mm Offset | black
The brand new Dorado Pro is ready to turn the downhill world upside down! As an upside-down fork with carbon casting, 37 mm stanchions and revised inner workings, the new Dorado Pro is the absolute pinnacle of suspension technology. The stiffer chassis is paired with a brand new, closed TPC+ cartridge and an improved air spring with IRT adjuster. These technologies - combined in an ultimate platform - offer more than enough adjustment options to inspire even the most experienced suspension tuner. At the same time, the Dorado Pro is so easy to handle that every rider can adjust their fork with ease.
37mm carbon CHASSIS
The Pro Carbon chassis is 27% stiffer than the previous 36mm version. It also weighs 238 grams less than the 27 millimeter Expert chassis.
UPSIDE DOWN DESIGN
Ensures an incredibly sensitive response and smooth driving experience. Constant lubrication of the bushings and seals improves function and reduces wear.
DORADO AIR
Manitou's unique balancing valve inside the fork ensures the perfectly balanced pressure ratio between the positive and negative air chambers. This means that you always have the best possible performance from your fork. Travel is also internally adjustable from 180mm to 190mm and 203mm.
IRT (Infinite Rate Tune)
IRT allows for softer spring tuning through independent air pressure adjustment in the initial and final strokes. The IRT technology creates a second positive air chamber that only affects the middle stroke to the end stroke. This allows the mainspring to be set at lower pressures to improve small bump sensitivity.
TPC+ DAMPER
A large oil volume and optimized flow paths dampen small and large impacts evenly and reliably. Internally, the TPC+ features two compression pistons, a hydraulic bottom-out piston and a spring-loaded IFP piston. Both the high-speed compression and the high and low-speed compression can be adjusted independently of each other.
ONE FOR ALL
The fork is suitable for 27.5" and 29" wheels. Markings on the fork legs help you to find the right clamping point for the fork crown. The offset can be adjusted with different triple clamps. 47 mm offset is optimized for 27.5" wheels, 57 mm offset for 29". When using the flat crown with 29" wheels, the maximum usable head tube length including headset is reduced to 121 mm.
TSR BLEED SCREWS
Thanks to the TSR screws, you can release excess pressure from your fork legs. This gives you consistent performance from sunrise to sunset.
Technical specifications:
Area of intended use : Downhill, Enduro
E-bike ready: yes
Wheel size: 27.5" | 29"
Material fork crown/shaft: forged aluminum / aluminum
Space between the double bridge 27.5": 124 mm - 158 mm
Space between the double bridge 29": 104 mm - 138 mm
Material fork tubes: 7057 aluminum, black anodized
Standpipe diameter: 37 mm
Material immersion tubes: aluminium
axle type : 20 x 110 mm BOOST thru axle
Steerer: 1 1/8"
Steerer tube length: approx. 260 mm
Travel: 203 mm (190/180 mm adjustable)
Spring system: Dorado Air
Adaptation of the spring characteristic: yes, with IRT system (air spring)
Cushioning: TPC+ damper
Lockout: none
Installation height: 602 mm (29" with 203 mm travel)
Brake Mount: Postmount, 203mm
Max. permissible brake disc size: 223 mm
Tire diameter max. 27.5": 717mm
Tire diameter max. 29": 756 mm
Tire width max.: 72 mm
Offset: 47mm
Colour: matt black
Weight according to the manufacturer: 2970g
Weight weighed: 2963g
Scope of delivery:
1x MANITOU suspension fork 27.5" | 29" Dorado Pro 203 mm | 20x110mm BOOST 47mm Offset | black
1x thru axle