The development of revolutionary Looks KéO Blade pedals! As with its predecessor, the click mechanism of the blade 2 does not need a coil spring. The voltage at the input and Ausklicken generated only a carbon leaf spring. This allows a more defined exit from the pedal as well as a significantly more rapid detachment of the foot at the end of the exit. To satisfy the needs of all riders, there is the KéO Blade 2 with 3 different trigger hardening: the version with 12 Nm is enough for most drivers, 16 Nm is designed for racers who are looking for a better grip and the 20 Nm version for strong sprinters and powerhouses the right choice, look for a maximum grip. However Look advisable to enter with 12 Nm, to gain experience and determine their needs, and optionally switch to a harder version. Thanks to a special tool, the leaf spring can be replaced to change the release tension.
Because of the perfect integration of carbon leaf spring the Blade 2 is the most aerodynamic pedal on the market. 2 channels on the sides support the optimal airflow additionally. Compared to the previous version Look has optimized the supporting surface of the pedal plate on the stainless steel surface of the pedal. With a contact area of 700 mm², the contact surface has almost doubled. Nevertheless could the weight of the pedals are pushed further down by a slender shaft line and a lower step height.
Long life guarantee the double seals and costly material testing of axles in excess of the applicable standards by far.
Use: Road, Triathlon, time trial Material pedal body: Carbon Material axle: chromoly steel Material spring: Carbon leaf spring Shoe pad: stainless steel bearing: 2x ball bearings, needle bearings 1x intended use: Road, Triathlon Freedom of movement: according Cleats 0 °, 4.5 ° (included) or 9 ° Release tension: 12, 16 or 20 Nm
Weight: 229g (295g including cleats and screws)
Delivery: a few pedals, a few Cleats (4.5 degrees) including fastening screws