LEONARDI RACING chainring GECKO TRACK oval direct mount for Capo crank | SRAM 3-hole | BOOST
Light, stiff and oval direct mount chainring from Leonardi Racing. Direct mount chainrings enable an optimal setup for single-speed or 1x10 / 11 and 1x12 (SRAM Eagle) drives. These chainrings are screwed directly to the crank arm and thus save a lot of weight compared to conventional spider / chainring combinations and are also significantly more torsion-resistant. The 7075 T6 aluminum alloy used also ensures low wear. Special teeth in a narrow wide design effectively prevent the chain from jumping off. The principle follows that of the SRAM XX1 chainrings. In conjunction with a SRAM Type2 / 3 or Shimano Shadow + rear derailleur, which have a greatly increased cage preload, the chain is reliably held in position even without a chain guide.
The ovalization of the chainring increases the performance by varying the drive train and optimizing the resistance. When you kick your legs, natural strengths and weaknesses are brought into harmony. In this way, better use of the stronger muscle groups is achieved and a balance is created in the weaker muscles on the way to work (lower stroke).
Technical specifications:
intended use : MTB
Material: aluminum 7075 T6
Technology: Narrow Wide, GECKO (direct mount), TRACK (ovalization)
bolt circle diameter : -
Mounting: Direct Mount | SRAM 3-hole
Number of teeth: 28, 30, 32, 34 or 36 teeth
Compatibility cranks : SRAM with 3-hole mount | Leonardi Capo with 3-hole mount
Compatibility chain: 10-speed , 11-speed or 12-speed (SRAM Eagle)
Assembly: -
chain line : depending on the crank used
Offset: Boost / Outboard (3 mm)
Adjustment options: none
Range (ovalization): n / a
Timing (force introduction): n / a
Color: black anodized
Weight: 65g (32 teeth), 73g (34 teeth)
Scope of delivery: 1x Leonardi Racing Gecko Track Direct Mount oval chainring