LEONARDI RACING chainring GECKO Direct Mount for Capo crank | SRAM 3-hole | BOOST
Light and stiff direct mount chainring from Leonardi Racing. Direct mount chainrings enable an optimal setup for single-speed or 1x10 / 11 and 1x12 (SRAM Eagle) drives. These chainrings are screwed directly to the crank arm and thus save a lot of weight compared to conventional spider / chainring combinations and are also significantly more torsion-resistant. The 7075 T6 aluminum alloy used also ensures low wear. Special teeth in a narrow wide design effectively prevent the chain from jumping off. The principle follows that of the SRAM XX1 chainrings. In conjunction with a SRAM Type2 / 3 or Shimano Shadow + rear derailleur, which have a greatly increased cage preload, the chain is reliably held in position even without a chain guide.
Technical specifications:
intended use : MTB
Material: aluminum 7075 T6
Technology: Narrow Wide, GECKO (direct mount)
bolt circle diameter : -
Mounting: Direct Mount | SRAM 3-hole
Number of teeth: 28, 30, 32, 34 or 36 teeth
Compatibility cranks : SRAM with 3-hole mount | Leonardi Capo with 3-hole mount
Compatibility chain: 10-speed , 11-speed or 12-speed (SRAM Eagle)
Assembly: -
chain line : depending on the crank used
Offset: Boost / Outboard (3 mm)
Adjustment options: none
Color: black anodized
Weight: 58g (28 teeth), 63g (30 teeth), 67g (32 teeth), 74g (34 teeth)
Scope of delivery: 1x Leonardi Racing Gecko Direct Mount chainring SRAM 3-hole | BOOST