INDUSTRY NINE hub rear MTB Torch Classic Center Lock for 12x148 mm thru-axle BOOST | Freewheeling SRAM XD
The Industry available in 11 colors available Nine Torch hubs are a real gem on every bike. With its externally sealed 4x bearing and an oversized axle the Torch hubs are well protected against environmental influences and extremely robust. Thus, they are ideally suited for the All Mountain and Enduro use. However, the highlight of the rear hub of the pawl freewheel 120 clicks per wheel revolution. Thus, a lost travel of only 3 degrees to the frictional connection results is performed when accelerating. Made possible by a 60 tooth freewheel body snap into the built-up of the six latches each 3 simultaneously. Especially in technical passages or hard sprints to the extremely rapid traction brings distinct advantages. And the fine screening results in a unique soundscape in the impeller.
Beveled spoke flanges help the forces on the sensitive spoke heads to reduce and thus prevent spoke fractures. The classic hub flanges are available with 28 or 32 spoke holes. Available are the hubs with Sram XD or SRAM / Shimnao standard freewheeling FW body. Variants for quick release and 12x142 mm thru-axle you can find also in our shop.
Do you like to make an offer for a complete custom wheelset with rims and spokes of your choice. Just send us an e-mail to firstname.lastname@example.org !
NOTE: The axle type s the hub shown may vary from this article.
intended use : Cross Country, Marathon, All Mountain, Enduro
bearing : 4-
Freewheel body: Sram XD
Recovery type: ratchet freewheel (6x jack)
Freewheeling gearing: every 3 ° (120 locking points per revolution)
axle type : 12x148 mm thru-axle BOOST
Number of holes: 28 or 32
Color: black, red, silver, blue, gold, orange, pink, violet, green, light green or turquoise
Weight: from 260g (manufacturer)