INDUSTRY NINE hub rear MTB Torch Classic Center Lock for 12x148 mm thru-axle BOOST | SRAM / Shimano
The Industry available in 11 colors available Nine Torch hubs are a real gem on every bike. With its externally sealed 4-fold bearing and an oversized axle the Torch hubs are well protected against environmental influences and extremely robust. Thus, they are ideally suited for the all mountain and enduro use. However, the highlight of the rear hub of the ratchet freewheel with 120 clicks per wheel revolution. Thus, for a backlash of only 3 degrees to the adhesion results occurs when accelerating. Made possible by a 60 tooth freewheel body snap into the built-up of the 6 ratchets each 3 simultaneously. Especially in technical passages or in hard sprints brings the extremely rapid adhesion distinct advantages. And the narrow spacing leads to a unique soundscape in the impeller.
Angled spoke flanges help the forces on the sensitive spoke heads to reduce and thus prevent fractures spoke before. The classic hub flanges are available with 28 or 32 spoke holes. Available are the hubs with Sram XD or SRAM / Shimnao Standard freewheel running body. Variants for quick release and 12x142 mm thru-axle, you can find also in our shop.
Do you like to create an offer for a complete custom wheelset with rims and spokes of your choice. Just send us an email to email@example.com !
NOTE: The Achsstandards the hub shown may vary from this article.
intended use: Cross Country, Marathon, All Mountain, Enduro
bearing: 4 times
Freewheel body: Shimano MTB 9-, 10-, 11-speed | Sram 9-, 10-speed
Recovery type: ratchet freewheel (6x jack)
Freewheel gear: all 3 (120 detents per revolution)
Achsstandard: 12x148 mm thru-axle BOOST
Hole number: 28 or 32
Color: black, red, silver, blue, gold, orange, pink, violet, green, light green or turquoise
Weight: from 260g (manufacturer)