Hope Tech 35W - Pro 4 SRAM XD rear wheel 27,5 "quick release / quick release axle
The trend towards wider tires continues to grow and the resulting lower tire pressures present new challenges for the rims so that tire stability can be ensured in bends. Also the protection of the tire sidewall is an issue, with narrow rims with wide tires.
With the newly developed HOPE Tech 35W the English manufacturer has precisely analyzed and implemented these problems. The very large inner width of 35 mm (as the name suggests) gives wide tires enough space and increases the stability of the side flank. This allows the air pressure to be lowered to 1 bar (observe tire release) and you have, of course, maximum traction.
The HOPE Tech 35W rim was constructed in such a way that the additional width without significant weight increase was included. This was achieved by an optimized rim profile, which has a single chamber and has spoke holes offset for a better fit of the spokes. In the optimization of the rim profile, of course, also the tubelessness was obtained. The easy assembly of tubeless tires is as easy as with all other HOPE Tech rims.
The wheels are imprinted directly in England, with the HOPE Pro 4 hubs, already known and beyond all doubt. The hubs from 2014 T6 aluminum are equipped with stainless steel bearings for long durability. As usual with HOPE, the hubs can easily be retrofitted to different axle type standard s and thus a new frame is no problem for you.
The freewheel sprocket has 44 teeth and thus a powerful start is ensured at any time. The 2 ratchets engage the toothing of the hub in the 8 ° rhythm. The interchangeable rotor offers the right drive for any drive, whether you want to drive Shimano, SRAM or Hope cartridges.
intended use : Enduro, trail bikes
Type of rim: clincher (wire and folding)
Wheel Size: 27.5 "
Brake type: only for disc brake
Brake disc mount: 6-hole
Material of the rim: 6061 aluminum
Material hub: 2014 T6 aluminum
Internal width: 35 mm
External width: 40 mm
Wheel height: 19 mm
ERD: 27.5 "/ 562 mm
Number of holes: 32 holes
Mounting width: 135 mm
axle type : 5x135 mm quick release / 12x142 mm thru axle
bearing : 4x stainless steel bearing
Seal: sealant on both sides
Freilauf Compatibility: 12, - 12X SRAM XD
Freewheel type: 4 ratchets / 44 teeth toothing
Tubeless capable: yes
Recommended tire width: 2,3 "- 3,2"
Maximum driver's weight: n / a
Color hub: black, silver, red, blue, violet or orange
Color rim: black
Weight: 1105g (manufacturer's data)
Scope of delivery: 1x rear wheel, conversion kit to 12x142 mm axle