The optimized design ensures flexible combinations with triggers and other fittings of the handlebar. The Hope Tech 3 lever works with all current brake calipers and is 5% stronger than the older Hope Tech Evo lever! You can still adjust the lever length and the pressure point. The piston is actuated by a cam and roller system, so that the lever without idle travel and gripping parts can be drawn. The two-piece clamp for mounting on the handlebar simplifies assembly because the assembly must not be dismantled from the handlebars. The Tech 3 can be combined without special lever clamp with the Shimano I-Spec trigger. For SRAM there is a delicate and unobtrusive lever clamp as a retrofit part. E4 caliper The very rigid yet finely milled Hope E4 caliper is ready for anything. High braking performance, excellent controllability and a thermal Dimmensionierung that brings to be reliable in the harshest terrain and most severe driver.
The usual way from 2014 T6 aluminum milled pliers is the result of development work with COSMOSWorks FEA (Finite Element Analysis).
This makes it possible to reduce weight, improve aesthetics and to produce the ideal partner to the Tech lever.
The sealed bleed nipple provide easier maintenance and further projecting fluid outlet ease the installation of the line. Stahlflexleitung These noble lines provide an improved pressure point, longer service life and brilliant appearance! Furthermore, a tear or bend the line when falling is effectively prevented. However, the only disadvantage is a more weight.
Material: aluminum, titanium, steel
Material brake pipe: Plastic or steel Flex
intended use : Tour / AM / Enduro / Downhill / Freeride
Lever brake VR: Left
HR levers Brake: right
Length brake pipe VR: 90 cm
Length brake line HR: 165 cm
Standard mounting: Postmount
Weight Standard line: from 568g (set without wheel and adapter)
Weight Stahlflexleitung: from 600g (set without wheel and adapter)
Delivery: a filled and vented brakes set without disk / adapter.