HAYES Dominion A4 disc brake | Single brake
Braking power is everything. That was the challenge that the engineers at Hayes took on. The result is the completely newly developed Dominion A4.
The transmitter on the lever is adjusted at the factory to the shortest possible idle travel in order to generate a crisp pressure point immediately upon actuation. Four pistons are built into the cold forged, stiff brake caliper in order to be able to use the largest possible brake pads and thus to generate maximum braking force. In addition, the generous dimensions of the brake calliper have a positive effect on thermal management. The Crosshair Caliper Alignment System makes the assembly and alignment of your brake caliper much easier. The brake calliper can be adjusted quickly, precisely and without grinding with two set screws on the side.
The motorsport-inspired two-stroke dual-port ventilation system makes it easier to maintain your brakes and you always have optimal performance. The brake line is reinforced with Kevlar in order to withstand possible damage as best as possible and not to distribute the DOT 5.1 brake fluid on the trail.
intended use : Downhill / Freeride, Enduro, All Mountain, Trail, E-MTB
Material brake caliper: aluminum
Brake lever material: aluminum
Material fastening screws: steel
Brake mounting: Postmount
Brake disc: without (Hayes D-Series recommended)
Braking medium: DOT 5.1
Brake line: plastic with kevlar
Brake pad: semi-metallic, sintered
Reach adjustment: yes, without tools
Pressure point adjustment: yes
Mounting: left or right (flip flop)
Cable length: 1000 mm (VR) or 1800 mm (HR)
Color: black / bronze, white logo
Weight: from 310g (front brake, 90 cm cable including fastening material without brake discs and adapter)
Scope of delivery:
1x HAYES disc brake Dominion A4 | Single brake front or rear without brake disc and adapter!
1 pair of semi-metallic brake pads
1 pair of sintered brake pads