Description
FRAEZEN stem BLOCK 35 mm | bronze
High-end bike parts - Made in Germany.
FRAEZEN's claim is to develop and manufacture high-quality and durable parts for your bike. In order not to leave anything to chance, all necessary steps, from the first draft to the finished product, are carried out directly on site in Leutkirch/Allgäu.
Both the construction and the production take place in the in-house production facility in the beautiful Allgäu. The noble bike parts are tested on the local trails of the region and in the international racing events of the Enduro World Series. The great advantage of on-site production and testing is obvious: short distances enable quick changes and improvements during development and result in products of the highest quality in series production.
Block - MTB stem for the toughest Enduro uses!
The stem is completely produced in Leutkirch, even the screws. The noble piece only leaves the local production facility for anodizing and is given the finishing touches by professionals in Central Germany. The stem has a rise of 7.5 degrees. This saves you a spacer and your cockpit becomes stiffer. The developers made a conscious decision to use stainless steel screws for the clamp because they are suitable for the intended use . The block is available in lengths of 37 mm, 44 mm and 51 mm and in three different colours.
Stem length matching the fork offset?
Looking at the stem, the first thing that strikes you is its slim and elegant design. Of course, the block is strong enough to meet the demands of the Enduro World Series. The Fraezen team is pursuing a new concept with the block - the stem length here corresponds to the three common fork offsets of 37 mm, 44 mm and 51 mm. This is the first offset specific stem on the market. The adjustment of the stem length to the offset of the suspension fork leads to better handling of the bike, as the pressure on the front wheel increases and makes the bike more controllable at higher speeds and corners. The 37 mm long stem is recommended for lovers of 27.5" wheels. Lengths of 44 mm and 51 mm are intended for the 29" fraction. If you prefer something more playful, you can also choose the next smaller size.
Technical specifications:
intended use : Enduro, Freeride
Material stem: 7075 aluminum
Material screws: stainless steel
Handlebar clamp Ø: 35 mm
Steerer diameter: 1 1/8"
Lengths: 37mm, 44mm and 51mm
Rise: +/-7.5mm (flip flop)
Clamp height steerer tube: 40 mm
Handlebar clamping width: 48 mm
Tool holder: Torx T25
Max. permissible torque fork shaft: 6 Nm
Max. permissible torque handlebar clamp: 6 Nm
Weight limit: k. A
Color stem: bronze anodized
Color screws: silver
Weight according to the manufacturer: 135g (44 mm length)
Weight weighed:
Scope of delivery:
1x FRAEZEN stem BLOCK 35 mm | bronze
1x FRAEZEN cotton bag packaging
2x FRAEZEN stickers
