FOX suspension fork 29 "Float 36 FS 160 HSC / LSC FIT RC2 Factory Boost 2017 black | Orange Logo 1 1/8" tapered
Sensitive tuning options provide the best performance on the trail. The new 36er forks of Fox underwent a complete makeover.
The result is a result which can be quite impressive. Stiffer, lighter and with even better response.
Numerous innovations expand the intended use range and the variability of the forks enormous. For example, the photographs of the shafts were designed to replace. Now you can decide individually between 15 or 20 mm. This saves some riders therefore the purchase of a wheel set.
The installation height corresponds to 2 mm to the 34er forks, what makes a fork Exchange problematic because of the small height difference hardly affects the suspension geometry of the entire wheel.
Super-stiff 36 mm stanchions with reduced friction KASHIMA coating (inside and outside), exclusive SKF seals and the revised RC2 FIT damping cartridge care as already known for sensibelstes response over a long lifetime.
Is an individually operable vehicle dynamics system specifically designed for the Enduro range. Rebound (18 clicks) and high speed (23 clicks) and low speed compression (26 clicks) can be adapted sensitively to every imaginable intended use. The revised version of 2016 speaks even more sensitive on uneven road surfaces.
The Genuine Kashima Coat coating for a soft buttery driving experience is exclusively available from FOX, the Kashima Coat logo is applied to both standpipes. The distinctive golden Genuine Kashima Coat coating offers superior overall performance and ensures minimum friction and optimum response with maximum durability.
Air volume Spacer
The FLOAT air spring forks and shocks can be finely adjusted by using Volumenspacern to tune the spring elements of progressive or less progressive. This allows the driver to fine-adjust the suspension exactly according to his needs.
To accommodate the increased distance of the standpipes to the axle, the hub flanges are moved by 5 mm on each side of the wheel center to the outside. So the new dimension of 15mm through axle is now 110 mm. The resulting better angle of lacing has a positive effect on the rigidity of the wheel.
Steerer diameter: tapered (1 1/8 "- 1.5")
Travel: 160 mm
Damping: FIT RC2
Possible settings: Low speed compression, high-speed compression, rebound, air pressure, the air volume
Tubes: 36 mm aluminum with low-friction Kashima Coat coating
Offset: 51 mm
Brake Mount: 7 "Postmount (180 to 203 mm brake disc)
axle receiver: QR15 x 110 mm
Color: black, orange Logo
Delivery: fork, Volumenspacer, headset claw, Boost thru axle QR15, Service book, instruction manual and stickers