FOX suspension fork 29 "Float 36 FS 160 3-Pos Adjust Fit4 Factory 2017 black | orange Logo Boost 1 1/8" tapered
Sensitive tuning options provide the best performance on the trail, provided that they are set correctly. And therein lies the problem - many hobby riders are overtaxed and recharge by incorrect settings not correct the potential of your suspension from. The result - more frustration than pleasure while biking.
To prevent such problems in the future, has made Fox thoughts and revised the CTD system. From the 3-position system was created.
This simplifies extremely the compression tuning and suspension settings to each other, enabling unprecedented performance and harmony of your undercarriage.
The new 36er forks of Fox underwent a complete makeover.
The result is a result which can be quite impressive. Stiffer, lighter and with even better response.
Numerous innovations expand the intended use range and the variability of the forks enormous. For recordable the recordings of the shafts were designed to replace. Now you can decide individually between 15 or 20 mm. This saves some riders therefore the purchase of a wheel set.
The installation height corresponds to 2 mm to the 34er forks, what makes a fork Exchange problematic because of the small height difference hardly affects the suspension geometry of the entire wheel.
Super-stiff 36 mm stanchions with reduced friction KASHIMA coating (inside and outside), exclusive SKF seals and the newly developed Fit4 damping cartridge care as already known for sensibelstes response over a long lifetime.
The fourth generation of our patented Fit4 (FOX Isolated Technology) encapsulated cartridge system offers three adjustable while driving pressure stage positions (open, medium and firm) at any moment to adapt to the intended use. The forks of the Factory series also have a low-speed compression adjustment with 22 clicks in open mode, allowing the driver to tune the spring behavior perfectly on his preference.
The Fit4 cartridges damper has been revised based on our award-winning HSC / LSC damper, so that all our forks now have a much more powerful damper. This year, the Fit4 damper was provided with an updated tuning that ensures greater sensitivity, yet firm grip.
Is an intuitive driving dynamics system with preset pressure level with 3 different modes:. Open, Medium and Firm Thus, the driver simply needs to order the adjustment of spring preload and rebound care.
In open mode, the pressure stage works in open mode and shines with absolutely sensitive response downhill.
In models with 3-pos-Adjust allows the open mode in addition to fine tune by 22 clicks to their own needs.
The medium mode works with a semi-open low-speed compression and thus forms the optimum compromise between Pedaliereffizienz and traction.
In Firm fashion a completely enclosed low-speed compression effectively avoids undershoot of the chassis and can climb the bike with ease.
The Genuine Kashima Coat coating for a soft buttery driving experience is exclusively available from FOX, the Kashima Coat logo is applied to both standpipes. The distinctive golden Genuine Kashima Coat coating offers superior overall performance and ensures minimum friction and optimum response with maximum durability.
Air volume Spacer
The FLOAT air spring forks and shocks can be finely adjusted by using Volumenspacern to tune the spring elements of progressive or less progressive. This allows the driver to fine-adjust the suspension exactly according to his needs.
To accommodate the increased distance of the standpipes to the axle, the hub flanges are moved by 5 mm on each side of the wheel center to the outside. So the new dimension of 15mm through axle is now 110 mm. The resulting better angle of lacing has a positive effect on the rigidity of the wheel.
Steerer diameter: tapered (1 1/8 "- 1.5")
Travel: 160 mm
Attenuation: Fit4 closed cartridge
Possible settings: 3-pos compression, rebound, air pressure, the air volume
Tubes: 36 mm aluminum with low-friction Kashima Coat coating
Offset: 51 mm
Brake Mount: 7 "Postmount (180 to 203 mm brake disc)
axle receiver: QR15 x 110 mm
Color: black, orange Logo
Delivery: fork, Volumenspacer, headset claw, Boost thru axle QR15, Service book, instruction manual and stickers