FOX suspension fork 2021 29 "SC Float 34 FS 120 Step-Cast 3-Pos-Adjust FIT4 Factory Boost shiny orange Kabolt 15x110 mm tapered 44 mm offset
The top fork from FOX for trail and light all-mountain use now comes with a step-cast chassis and revised damping adjustment for even better response.
Rigid 34 mm stanchions with low-friction KASHIMA coating, exclusive SKF seals and the closed cartridge ensure a long service life.
Different tuning options ensure best performance on the trail, provided they are set correctly. And that is exactly where the problem lies, many hobby drivers are overwhelmed and do not fully utilize the potential of their chassis due to incorrect settings. The result is more frustration than pleasure when biking.
To prevent such problems in the future, Fox thought about and developed the 3-pos system. This extremely simplifies the adjustment of the pressure levels and the coordination of the spring elements with each other and thus enables an unprecedented performance and harmony of your chassis.
34 SC CHASSIS DESIGN
The striking shape of the dip tube design is not just for the look. With the Step-Cast (SC) chassis of the 34 series, FOX uses a narrower design to save weight in the lower part of the fork. The 34 SC fork still scores with excellent driving characteristics. The 34 mm stanchions and generously overlapping bushes ensure precise implementation of the steering impulses.
The fourth generation of the patented and encapsulated FIT4 (FOX Isolated Technology) cartridge system offers three pressure level positions (open, medium and fixed) that can be adjusted while driving, for adaptation to the terrain conditions at any time. The forks of the Factory series also have a low-speed compression setting with 22 clicks in open mode, so that the driver can perfectly adapt the spring behavior to his preferences.
The FIT4 cartridge damper has been revised based on the award-winning HSC / LSC damper, so that all forks now have a significantly more powerful damper. This year, the FIT4 damper has been updated with an adjustment that ensures more sensitivity and still a firm hold.
The response of the fork is significantly improved by the enlarged negative air chamber. This increases comfort because the breakaway torque has been reduced. In addition, a more linear spring characteristic offers better performance, especially in the middle travel ranges.
FLOAT AIR SPRING
The FLOAT air spring system reduces the breakaway torque and thus offers a highly sensitive fork and full comfort even with small impacts. And for every driver type and with different air pressure. Similar to the FLOAT struts, the FLOAT suspension system is characterized by a positive and a negative air chamber, which automatically counteract each other when driving
compensate. Every driver thus enjoys the advantages of the correct, precisely balanced air pressure in both air chambers. The progression of the spring characteristic can be adjusted with our air volume spacers - which enables every driver to precisely adjust the characteristics of the air spring.
AIR VOLUME SPACERS
The FLOAT air spring of our forks and struts can be fine-tuned by using volume spacers to adjust the spring elements more progressively or less progressively. This allows the driver to fine-tune the suspension exactly according to his needs.
The Genuine Kashima Coat coating for a butter-soft driving experience is exclusively available from FOX, the Kashima Coat logo is applied to both stanchions. The distinctive golden Genuine Kashima Coat coating offers outstanding overall performance and ensures minimal friction and optimal responsiveness with maximum durability.
intended use : Cross Country Trail, All Mountain
E-bike ready: no
Wheel size: 29 "
Fork crown / shaft material: aluminum / aluminum
Stanchions material: aluminum, Kashima (gold coating)
Immersion tube material: aluminum
axle type : 15x110 mm Kabolt through axle
Steerer: 1.5 "to 1 1/8" tapered
Steerer tube length: 265 mm
Travel: 120 mm
Spring system: Float Air, air
Adjustment of the spring characteristic: yes, via volume spacer
Damping: 3-position FIT4, closed cartridge
Installation height: 530.2 mm
Brake mount: Postmount
Max. permissible brake disc size: 210 mm
Tire diameter max .: 759 mm
Tire width max .: 2.6 "or at least 8.5 mm tire clearance to the fork bridge
Offset: 44 mm
Color: glossy orange, black-gray decals
Weight according to the manufacturer: 1623g (29 ", 120 mm, 15x110 mm Boost, 3Pos-Adj)
Weight weighed: 1638g (44 mm offset, without thru axle and accessories)
Scope of delivery:
1x FOX suspension fork 2021 29 "SC Float 34 FS 120 Step-Cast 3-Pos Adjust FIT4 Factory Boost
1x FOX Kabolt thru axle (Boost)
3x FOX Air Volume Spacers
1x ahead claw
1x instruction manual