FOX Fork 2020 29 "SC Float 34 FS 120 Step-Cast 3-Pos-Adjust FIT4 Factory Boost glossy orange Kabolt 15x110 mm tapered
FOX's top fork for trail and light all-mountain use now comes with Step-Cast chassis and revised damping tuning for even better responsiveness.
Stiff 34 mm stanchions with friction-reduced KASHIMA coating, exclusive SKF seals and the closed cartridge ensure a long service life.
Different voting options ensure the best performance on the trail, provided they are set correctly. And that's exactly where the problem lies - many hobby drivers are overwhelmed with it and do not properly exploit the potential of their chassis due to incorrect settings. The result is more frustration than pleasure in biking.
To prevent such problems in the future, Fox has thought and developed the 3-pos system. This extremely simplifies the pressure level adjustment and the coordination of the spring elements with each other and thus allows an unprecedented performance and harmony of your suspension.
34 SC CHASSIS DESIGN
The distinctive shape of the dip tube design is not just for the look. In the Step-Cast (SC) chassis of the 34 Series, FOX uses a narrower design to save weight in the lower fork part. Nevertheless, the 34 SC fork scores points with excellent handling characteristics. The 34 mm stanchions and generously overlapping bushings ensure precise implementation of the steering impulses.
The fourth generation of the patented and encapsulated FIT4 (FOX Isolated Technology) cartridge system provides three on-the-run adjustable compression (open, medium and fixed) positions to adapt to terrain conditions at all times. The Factory Series forks also feature a low-speed compression setting with 22 clicks in open mode, allowing the rider to fine-tune spring behavior to their liking.
The FIT4 cartridge silencer has been redesigned based on the award-winning HSC / LSC damper, so all forks now feature a significantly more powerful damper. This year, the FIT4 damper has been updated with an improved tuning that provides more sensitivity and yet firm grip.
The enlarged negative air chamber significantly improves the response of the fork. This increases the comfort, because the breakaway torque could be reduced. In addition, a more linear spring characteristic offers better performance, especially in the middle travel ranges.
FLOAT AIR SPRING
The FLOAT air suspension system reduces the breakaway torque and thus provides a highly sensitive fork and rich comfort even with small punches. And that for every type of driver and with different air pressure. Similar to the FLOAT struts, the FLOAT suspension system features a positive and a negative air chamber, which automatically align with each other when driving
compensate. Each driver thus enjoys the benefits of the correct, precisely balanced air pressure in both air chambers. The progression of the spring characteristic curve can be adjusted with our air volume spacers - which allows each driver to precisely adjust the characteristics of the air spring.
AIR VOLUME SPACERS
The FLOAT air spring on our forks and struts can be fine-tuned through the use of volume spacers to tune the spring elements more progressively or less progressively. This allows the driver to fine-tune the suspension exactly to his needs.
The Genuine Kashima Coat coating for a buttery-soft ride is exclusively available only from FOX, the Kashima Coat logo is applied to both stanchions. The distinctive golden Genuine Kashima Coat coating delivers superior overall performance for minimal friction and optimal responsiveness with maximum durability.
intended use : Cross Country Trail, All Mountain
E-bike ready: no
Impeller size: 29 "
Material fork crown / shaft: aluminum / aluminum
Material stanchions: Aluminum, Kashima (coating gold)
Material dip tubes: aluminum
axle type : 15x110 mm Kabolt through axle
Steerer: 1.5 "to 1 1/8" tapered
Steerer shaft length: 265 mm
Travel: 120 mm
Spring system: Float Air, Air
Adjusting the spring characteristic: yes, via Volume Spacer
Damping: 3-pos-FIT4, closed cartridge
Lockout: fork crown
Installation height: 530.2 mm
Brake mount: Postmount
Max. permissible brake disc size: 210 mm
Tire diameter max .: 759 mm
Tire width max .: 2,6 "or at least 8,5 mm tire clearance to fork bridge
Offset: 44 mm or 51 mm
Color: orange glossy, black and yellow decals
Weight according to manufacturer: 1623g (29 ", 120 mm, 15x110 mm Boost, 3Pos-Adj)
Weight itself weighed: 1630g (44mm offset, without thru axle and accessories)
1x FOX suspension fork 2020 29 "SC Float 34 FS 120 Step-Cast 3-Pos Adjust FIT4 Factory Boost
1x FOX Kabolt thru axle (Boost)
3x FOX Air Volume Spacers
1x Ahead claw
1x user manual
Fox 34 Tuning Guide