FOX Fork 2020 27.5 "Float 36 FS 160 GRIP2 Factory Boost matte black 15x110 mm tapered 44 mm Offset
The FOX top fork for the trail, all-mountain and light Enduro use, now comes with new Grip2 damper and EVOL technology for even better response.
Stiff 36 mm anodized standpipes, exclusive SKF seals and the closed cartridge ensure a long service life.
The different tuning options of the Grip2 damping ensure best performance in the field. Ground contact is almost always given with her. Even in difficult passages, the fork works reliably and you do not lose control of your bike.
In this damping Fox has packed all his knowledge. The different setting options offer the possibility to optimally adapt them to the various conditions of use.
You can set the high and low speed compression and the high and low speed rebound separately. The setup has to be done carefully, but afterwards it offers endless fun on any surface.
With the integrated Variable Valve Control (VVC) system, the rebound of the rebound valve is varied by a leaf spring and not by the change in preload. This requires a finely adjustable function and modification.
In addition, attention has been paid to the use of low friction and coated materials throughout the development process. This allows a very fine response and increases comfort significantly.
The enlarged negative air chamber significantly improves the response of the fork. This increases the comfort, because the breakaway torque could be reduced. In addition, a more linear spring characteristic offers better performance, especially in the middle travel ranges.
FLOAT AIR SPRING
The FLOAT air suspension system reduces the breakaway torque and thus provides a highly sensitive fork and rich comfort even with small punches. And that for every type of driver and with different air pressure. Similar to the FLOAT struts, the FLOAT suspension system features a positive and a negative air chamber, which automatically align with each other when driving
compensate. Each driver thus enjoys the benefits of the correct, precisely balanced air pressure in both air chambers. The progression of the spring characteristic curve can be adjusted with our air volume spacers - which allows each driver to precisely adjust the characteristics of the air spring.
AIR VOLUME SPACERS
The FLOAT air spring on our forks and struts can be finely adjusted through the use of volume spacers to tune the spring elements more progressive or less progressive. This allows the driver to fine-tune the suspension exactly to his needs.
The Genuine Kashima Coat coating for a buttery-soft ride is exclusively available only from FOX, the Kashima Coat logo is applied to both stanchions. The distinctive golden Genuine Kashima Coat coating delivers superior overall performance for minimal friction and optimal responsiveness with maximum durability.
intended use : Cross Country Trail, All Mountain
E-bike ready: no
Impeller size: 27.5 "
Material fork crown / shaft: aluminum / aluminum
Material stanchions: aluminum, Kashima (coating gold)
Material dip tubes: aluminum
axle type : 15x110 mm thru-axle Boost
Steerer: 1.5 "to 1 1/8" tapered
Steerer shaft length: 265 mm
Travel: 160 mm
Spring system: Float Air, Air
Adjusting the spring characteristic: yes, via Volume Spacer
Damping: Grip2, closed cartridge
Installation height: 549.1 mm
Brake mount: Postmount
Max. permissible brake disc size: 210 mm
Tire diameter max .: 725 mm
Tire width max .: 2.5 "or at least 8.5 mm tire clearance to the fork bridge
Offset: 44 mm
Color: black matt, orange-gray decals
Weight according to manufacturer: 1956g (27.5 ", 160mm, 15x110mm Boost, 3Pos-Adj)
Weight itself weighed: 2042g (44mm offset, without thru axle and accessories)
1x FOX Fork 2020 27.5 "Float 36 FS 160 GRIP2 Factory
1x FOX 15x110 mm thru-axle boost
3x FOX Air Volume Spacers
1x Ahead claw
1x user manual
EAN: 611056140635 | MPN: 910-20-767