FOX suspension fork 2019 27.5 "| 650B Float 36 P-SE 160 GRIP2 Performance Elite Boost mat black 15x110 mm tapered 44 mm
The FOX top fork for the trail, all-mountain and light Enduro use, now comes with new Grip2 damper and EVOL technology for even better response.
Stiff 36 mm anodized standpipes, exclusive SKF seals and the closed cartridge ensure a long service life.
The different tuning options of the Grip2 damping ensure best performance in the field. Ground contact is almost always given with her. Even in difficult passages, the fork works reliably and you do not lose control of your bike.
In this damping Fox has all the knowledge packed. The different setting options offer the possibility to adapt them optimally to the various conditions of use.
You can set the high and low speed compression and the high and low speed rebound separately. The setup has to be done carefully, but afterwards it offers endless fun on any surface.
With the Variable Variable Valve Control (VVC) system, the rebound of the rebound valve is varied by a leaf spring and not by the change in preload. This requires a finely adjustable function and modification.
In addition, attention was paid to the use of low-friction and coated materials throughout the development process. This allows a very fine response and increases comfort significantly.
The enlarged negative air chamber significantly improves the response of the fork. This increases the comfort, because the breakaway torque could be reduced. In addition, a more linear spring characteristic offers better performance, especially in the middle travel ranges.
FLOAT AIR SPRING
The FLOAT air suspension system reduces the breakaway torque and thus provides a highly sensitive fork and rich comfort even with small punches. And that for every driver type and for the most different air pressure. Similar to the FLOAT struts, the FLOAT suspension system features a positive and a negative air chamber, which automatically align with each other when driving
compensate. Each driver thus enjoys the benefits of the correct, precisely balanced air pressure in both air chambers. The progression of the spring characteristic curve can be adjusted with our air volume spacers - which allows every driver to precisely adjust the characteristics of the air spring.
AIR VOLUME SPACERS
The FLOAT air spring on our forks and struts can be finely adjusted through the use of volume spacers to make the spring elements more progressive or less progressive. This allows the driver to fine tune the suspension exactly to his needs.
intended use : Trail, All Mountain, Enduro
Wheel size: 27.5 "| 650B
Material fork crown / shaft: aluminum / aluminum
Material stanchions: aluminum
Material dip tubes: aluminum
axle type : 15x110 mm BOOST floating axle
Steerer: 1.5 "to 1 1/8" tapered
Travel: 160 mm
Spring system: Float air
Damping: Grip2, closed cartridge
Installation height: 549.1 mm
Brake mount: Postmount
Max. permissible brake disc size: 210 mm
Tire diameter max .: 27.5 "
Tire width max .: 2.5 ", width in the fork bridge: approx. 90mm
Offset: 44 mm
Color: black matt, gray-white decals
Weight: 1956g (manufacturer)
Scope of delivery: suspension fork, thru-axle, manual, Air Volume Spacers