FOX seat post 2021 Transfer P-SE Performance internal | 200 mm
Designed from the ground up, the FOX Transfer comes up with superior features for the coming season. The weight has been reduced, the insertion depth and length have been reduced and ease of maintenance has been increased. The revised clamping head now offers more optimal clamping and a reduced overall height.
Vario seat posts are all the rage, be it on the Transalp, on enduro tours or on a small evening tour of the house. Just uphill, now a little downhill or tricky trail. With a Vario seat post, you always have the optimal seating position without the hassle of adjusting the quick release.
Fox sends its "saddle lift" into the race with the Transfer Performance Elite Series. Equipped with the identical Kashima Coat coating as it is used on the suspension forks and dampers, the Transfer is the ultimate addition to your Fox chassis!
It scores with a continuously adjustable saddle height. Different lever designs ensure that it fits perfectly with every switching system. The remote lever not only controls the saddle height, but also the speed of the height adjustment.
In this version, the cable is routed inside so that annoying cables remain outside. When choosing the support point for the cable, Fox decided to lead it to the end of the support, where a small barrel takes up the cable. There are no fiddly screws or complicated tension systems. If you have to, removing the support without tools is child's play. The cable is then pushed through to the remote and clamped using a small nut. The fine adjustment of the tension is made directly on the remote control by adjusting the tension.
Application: MTB, Tour, Gravel
Material screws: steel
Operation: via remote lever with internal control, Fox and Race Face compatible (not included) Diameter: 30.9 or 31.6 mm
Length (A): 530.7 mm (when extended)
Adjustment range (B): 200 mm
Minimum insertion depth (C): 158 mm (including control)
min. possible usable height (D): 238.9 mm
Max. Possible usable height (E): 380.7 mm (upper edge of saddle clamp to lower edge of saddle frame)
Offset: 0 mm
Compatibility seat stays: round (7x7 mm) and oval (7x9 mm)
Function: pneumatic / hydraulic
Feature: Black Ano Coating
Max. Driver weight: n / a
Color: black matt (lower part) black glossy (immersion tube)
Weight according to the manufacturer: approx. 494g (30.9 x 125 mm)
Weight weighed: 662g (30.9 x 200mm), 690g (30.9 x 200mm)
Scope of delivery: 1x FOX seat post 2021 Transfer P-SE Performance internal | 200 mm, without remothebel
Note: The remote lever required for operation must be ordered separately, here you can
Choose between different makes and designs for 1-way or for 2 or 3-way drives!
This seat post has an internal control. This means that the cable has to be routed through the frame (seat tube). Please make sure that your frame is designed for the use of supports with internal control!