FOX Seatpost 2020 Transfer FS Factory Kashima Coat intern | 175 mm
Just steep uphill, now a little downhill or tricky trail. With a Vario seat post, you always have the optimal sitting position without the hassle of adjusting it with a quick release.
Vario seat posts are very trendy, be it on the Transalp, enduro tours or the small evening round of the house.
Fox sends its "saddle lift" into the race with the transfer. Equipped with the identical Kashima Coat coating as used for the suspension forks and dampers, the transfer is the ultimate addition to your Fox suspension!
It scores with an infinitely adjustable saddle height. Two different lever designs ensure that it fits perfectly with any switching system. The remote lever not only controls the saddle height, but also the speed of the height adjustment.
With this version, the cable is laid inside, so that annoying cables remain outside. When choosing where to hold the cable, Fox decided to guide it to the end of the support, where a small wedge holds the cable. There are no fiddly screws or complicated voltage systems. If need be, removing the support without tools becomes child's play. The cable is then pushed through to the remote and clamped using a small nut. The fine adjustment of the tension is made via a cable adjustment directly on the remote control.
Thanks to the Kashima coating, a gentle response of your transfer support is guaranteed. This coating is exclusively available from FOX. It offers outstanding overall performance, ensures minimal friction and optimal function with maximum durability.
Application: MTB, tour, gravel
Material screws: steel
Operation: via remote lever with internal control, Fox and Race Face compatible (not included in delivery) Diameter: 31.6 mm
Length (A): 505.7 mm (when extended)
Adjustment range (B): 175 mm
Minimum insertion depth (C): 128 mm (including control)
min. possible usable height (D): 233.2 mm
Max. Possible usable height (E): 404.3 mm (upper edge of seat clamp to lower edge of saddle frame)
Offset: 0 mm
Compatibility seat stays: round (7x7 mm) and oval (7x9 mm)
How it works: pneumatic / hydraulic
Feature: Kashima Coat coating
Max. Driver weight: not specified
Color: black matt, gold (Kashima)
Weight according to the manufacturer: approx. 519g (30.9 x 125 mm)
Weight weighed: 604g (30.9 mm)
Scope of delivery: 1x FOX seat post 2020 Transfer FS Factory Kashima Coat intern | 175 mm, without remote lever
Note: The remote lever required for operation must be ordered separately, here you can
choose between different brands and designs for single or double, triple drives!
This seat post has an internal control. This means that the train must be routed through the frame (seat tube). Please make sure that your frame is intended for the use of supports with internal control!
Fox Transfer manual