FOX Float damper X2 FS 2-Pos Adjust Factory 2017
The X2 dual chamber damper is an absolute milestone on the steamer market and the FOX-engineers Show-Konkuenz the still not the end of development for air dampers in Downhill is reached ... The separately adjustable compression and rebound in the high speed and low speed range , can this damper on the different courses downhill in the World Cup adapt. To a performance to offer you that you have never experienced and felt.
The EVOL said air chamber with increased volume for the negative air chamber. EVOL stands short for Extra Volume. Also this adaptation should have a positive effect on the suspension quality by the brake-away is reduced (resulting in better traction and more responsive) and at the same characteristic in the middle range of suspension lifted slightly and thus linear. To the rear is the Fox Float shock absorbers are considerably more powerful.
RODE VALVE SYSTEM (RVS)
Provides a seamless attenuation transition in the alternating dissipation of small and large impacts, providing more control for a better and faster response of the system, at the same time. Since the deflection of the piston works as a pump to drain the oil before the piston flow through the compression damping behind the piston and the flow direction is reversed again by the rebound damping during rebound!
The new available for FLOAT X2 and DHX2 damper 2-stage X2 lever for open / hard mode maintains the high and low speed compression adjustment.
The Genuine Kashima Coat coating for a soft buttery driving experience is exclusively available from FOX the Kashima Coat logo is applied to both standpipes. The distinctive golden Genuine Kashima Coat coating offers superior overall performance and ensures minimum friction and optimum response with maximum durability.
Type: downhill, enduro, freeride
Possible settings: high speed compression, low speed compression, high-speed rebound, low speed rebound, air pressure
Installation lengths: 200 mm x 51 mm | 200 mm x 57 mm | 216 mm x 63 mm
Weight: 490g (manufacturer information without sockets)
Please enter at the end of the order, which BuchsenmaÃ? you need. An overview of available FOX socket sets and cables you can find in our shop .
Scope of supply: damper, Service book, instruction manual and stickers