FOX Damper 2022 Float X FS 2-Pos Trunnion EVOL LV Factory 185x55 mm | metric
Are you an ambitious trail or all-mountain biker? The Fox Float X damper was developed just for you and your trail. It combines low weight and high integrity with excellent, almost fade-free damping. The new one-piece design contributes a lot to the overall package, so the damper itself is more stable, enables easier tuning and shines with a wider range of rebound damping.
An enlarged air chamber reduces the air pressure to be used and ensures a more sensitive response. Various setting options for the low-speed compression level (2 modes and 11 clicks) and the rebound (16 clicks) guarantee that you will find the ideal setup for you. Furthermore, the low-friction Kashima coating reduces the breakaway torque.
Factory says it all - full functionality, the best materials and developed to meet the high demands of top drivers on the world's trails and racetracks. All products in the Factory series have the Genuine Kashima Coat coating for a buttery smooth ride.
Metric installation dimensions
By introducing metric installation dimensions, the damper manufacturers want to standardize the standards. There shouldn't be so many different variants in the future. In addition, a similar linear gradation of the various length and stroke dimensions is sought, as is already the case with suspension forks. Incidentally, these dampers offer more space inside, because the hole spacing has usually been slightly increased for the same length of stroke. This allows the function and reliability to be optimized.
This damper is specially designed for mount provided by Trunnion standard. In this case, the upper attachment is on the side of the damper and not, as is normally the case, in a damper eye. This made it possible to shorten the overall length without causing space problems inside.
MCU bottom-out bumper
This end stop made of Micro Cellular Urethane foam does not absorb any oil and improves the spring characteristic in the end progression. The X, X2 Float and DHX2 dampers now harmonize perfectly in bikes with linear rear triangle kinematics.
The air chamber called EVOL with increased volume for the negative air chamber. EVOL stands for "Extra Volume". This adjustment should also have a positive effect on the suspension quality by reducing the breakaway torque of the damper. This leads to better traction and softer response. At the same time, the characteristic curve can be raised a little in the middle spring travel range, which is thus more linear. The rear end with the Fox Float damper should be much more powerful.
The Kashima coating for a smooth driving experience is exclusively available only from FOX. It offers an outstanding overall performance, ensures minimal friction and optimal responsiveness with maximum durability.
intended use : Trail / All Mountain
Tune: CM (Compression Medium), RM (Rebound Medium), Rezi L / M (Light / Medium)
Attachment eye above: Trunnion Mount
Attachment eye below: standard
Material: aluminum, Kashima coating
Suspension: air, FloatAir
Adjustability: 2 modes (Open / Firm), 11-speed e compression stage fine adjustment in open mode, 16-fold rebound stage, air pressure
Lockout: on the damper
Installation length / stroke: 185 x 55 mm | 0.4 spacer
Features: extra large EVOL air chamber, low-friction Kashima coating
Color: Kashima gold, orange logo
Weight according to the manufacturer: from 459g
Weight weighed by yourself:
Scope of delivery:
1x FOX damper 2022 Float X FS 2-Pos Trunnion EVOL LV Factory 185x55 mm | metric
1x service booklet, instructions for use and sticker