header image

    EXTRALITE Hub rear HyperCamber2 | Freehub Body Shimano | SRAM

    Item no.:
    11547

    Product weight:194g
    Manufacturer:
    Extralite
    529,00 € UVP: 529,00 €
    including 19% VAT. , no shipping costs zzgl. Versand
    • 1 week
    Axle

    Article details

      EXTRA LITE hub rear HyperCamber2 | Freewheel Shimano | SRAM

      The HyperCamber rear hub of Extralite sets standards in every respect. Light, beautiful, reliable and convertible to different Achsstandards. The design of the hub has been optimized using advanced simulation techniques and with the organic oversized design provides optimum flow of force in the material. The spoke flanges are designed for straight spokes to allow even when the spokes a possible direct and geradliniegen power flow. An optimization to the best possible flow of power was of course operated in the freewheeling mechanism. The freewheel is realized via a toothed wheel which engages directly into a introduced into the free running gear, in getting all 36 teeth to mesh also high forces to be transmitted safely.

      When HyperCamber rear hub of the drive-side flange on an aluminum spider is extremely vergößert. This feature ensures a flatter angle spokes on the drive side, and thus a more even spoke tension between left and right side of the spoke skeleton. In addition, the stress of the spokes is reduced by acting drive influences. Therefore, the Hyper Camber is especially recommended for larger wheels as 27.5 "or 29". These sizes hyper Camber makes the advantage of better flange geometry of the clearest.

      The second generation of HyperRear hub itself is just an update of two details. The seal between the hub body and freewheel has been completely redesigned and now develops an even higher sealing effect at constant, low friction. In addition, the linkage between pulley and hub body has been redesigned. Should the teeth be worn in the hub it is now possible a new pulley employ slightly offset and prepare so full function again!


      Technical specifications:

      Material: Aluminum 7075TXX
      Mounting width: 135 mm, 142 mm
      Number of holes: 32
      Disc brake mounts: 6 hole IS2000
      Achsstandard: quick-release or thru axle 12 x 142 mm X-12 | E-Thru | Maxle142
      Recovery type: 10-speed SRAM, 10-, 11-speed Shimano
      bearing: 2 x sealed 17-26 2RS and 2 x 17-30 2RS gedichted
      Color: black with laser logo
      Weight: about 194g


      Note: The hub is optional hybrid ceramic bearings available,
      contact therefore you our service team.


      Product weight:194g
      Top