EXTRALITE Freehub Body Conversion Kit Shimano Version 1.0 for UltraRear SX | SPX | SLX hub
Spare freewheel / conversion kit for Extralite UltraRear SX, SPX or SLX rear hubs.
The freewheel is based on a pawl principle with two pawls and a toothing in the hub body with 32 teeth. The bias of the pawls takes over a rubber ring, instead of the conventional springs made of steel or titanium, which saves additional weight.
The freewheel body was designed for maximum loads and works even with over half a ton of force on the chain.
Various freewheel kits are available:
Kit A - Hubs Version 1.0: Campagnolo 11-speed to Shimano 11-speed (axle width 130 mm)
Kit B - hubs version 1.0: Shimano 9-, 10-speed recommended to Shimano 11-speed (axle width 131 mm)
Kit C - Hubs Version 1.0: Shimano 9-, 10-speed to Shimano 11-speed (axle width 130 mm)
Note: Using Kit B may require re-centering the impeller.
Technical specifications:
Material: aluminum
Compatibility Cassette: Shimano 9-, 10-speed or 11-speed Road
Compatibility Hubs: Extralite UltraRear SX, SPX or SLX
Compatibility wheels: ns
Freewheel type: 2 pawls / 32 teeth
Bearing: 1x industrial bearing (61803-LLB / ABEC 5), 1x TX plain bearing
Manufacturer number: n / a
Color: gold bronze
Weight: 40g
Delivery:
1x freehub body incl. 2 pawls, industrial bearings, rubber spring and sealing ring
1x TX sliding bearing
1x spacer
1x 5cc special grease Alugrease Super1
Quick start Guide:
Extralite UltraRear Freewheel Body | EN