EXTRALITE Freilaufkörper Conversion Kit Shimano Version 1.0 for UltraRear SX | SPX | SLX hub
Replacement clutch / conversion kit for UltraLear SX, SPX or SLX rear wheel hubs.
The freewheel is based on a pawl principle with two pawls and a toothing in the hub body with 32 teeth. The preload of the pawls takes over a rubber ring, instead of the conventional springs of steel or titanium, which saves additional weight.
The freewheel body has been designed for maximum loads and also works at over half a ton of force on the chain.
Various free-wheel kits are offered:
Kit A - Hubs Version 1.0: Campagnolo 11-speed to Shimano 11-speed (axle width 130 mm)
Kit B - Hub version 1.0: Shimano 9-, 10-speed to Shimano 11-speed (axle width 131 mm) recommended
Kit C - Hubs Version 1.0: Shimano 9-, 10-speed to Shimano 11-speed (axle width 130 mm)
Note: If Kit B is used, re-centering the impeller may be necessary.
Technical specifications:
Material: aluminum
Compatibility Cartridges: Shimano 9, 10-speed or 11-speed Road
Compatibility hubs: Extralite UltraRear SX, SPX or SLX
Compatibility Wheels: n / a
Freewheel type: 2 ratchets / 32 teeth
Bearing: 1x industrial bearing (61803-LLB / ABEC 5), 1x TX plain bearing
Manufacturer number: n / a
Color: goldbronze
Weight: 40g
Delivery:
1x Freilaufkörper including 2 ratchets, industrial bearings, rubber spring and sealing ring
1x TX-Gleilager
1x Spacer
1x 5cc special grease Alugrease Super1
Quick start Guide:
Extralite UltraRear Freehub Body | EN