E * THIRTEEN crank LG1r Race Carbon DH
The LG1r is the uncompromising downhill crank with the seal of approval of the Downhill World Cup. The crank is not just an upscaled XC crank but was specially designed for the extreme demands on hard terrain. e * thirteens Quick Connect Lockring offers you the possibility to mount a spider or a direct mount chainring - according to your preferences. The Polygon P3 Connect crank holder creates a 100% surface fit between the axle and the crank arm, which ensures an 18% stiffer connection than the previous cranks. The 30 mm oversize axle made of aluminum offers the best stiffness with minimal weight. Thanks to APS, the lateral bearing play can be adjusted with ease and without great effort.
The Adaptive Preload System refers to the tool-free adjustment system for the e * thirteen cranks , with which the lateral bearing play is adjusted. Simplifies the crank assembly enormously and makes assembly errors almost impossible.
The P3 Connect System was developed on the basis of the P3 Polygon Standard from 1937. The contact area between the 30 mm oversized axle and the crank arm ensures an extremely rigid connection.
intended use : MTB (Downhill, Enduro)
Material crank arms: carbon
Material spider: not included
Crankshaft material: aluminum
Crankshaft diameter: 30 mm
Crank lengths: 170 mm
bolt circle diameter diameter: Direct Mount
Spider: not included
Chainring gradation: not included
Chainring Bolts: Direct Mount
chain line : k. A.
Q factor: n / a
Compatibility bottom bracket: 83 mm BSA
Compatibility chains: dependent on chainring / not included
Driver weight: n / a
Finish: carbon matt
Weight: 480g (170 mm crank arm length)
Scope of delivery:
1x e * thirteen DH crank
2x protective cap for crank arm
1x assembly tool for chainring