ENVE G Series Alloy Dropper Post 27.2mm x 350mm | 40mm
Your new ENVE G Series alloy dropper post seat post, with 40 mm drop, lowers your center of gravity for more confidence and control when riding in difficult situations.
The Enve G Series Alloy Dropper Post is ideal for your bike-packing adventure, but even if it's about the last second in the race, you're on the right track with it. At 402g, it doesn't weigh too much on the scales either. Thanks to the upside-down design, saddlebags can also be attached without any problems and it can be shortened by 130 mm, which saves another approx. 50g in weight.
Maintenance can be carried out on the support without special tools. The frame must be designed for the internal routing of the train for the support. It has a base diameter of 27.2 mm, but can be used in frames with a 30.9 or 31.6 mm seat tube with the included reducing sleeves.
The support is delivered without a remote control. Optionally, the Enve Drop Bar Dropper Post Lever can be purchased. Alternatively, remote levers from other manufacturers can be used.
Technical specifications:
intended use : Gravel, Cyclocross
Material: aluminum
Material screws: steel
Operation: internal control (internal train routing) via optionally available remote lever
Diameter: 27.2mm
Length (A): 350 mm (extended, incl. control),
Adjustment range (B): 40 mm
Minimum insertion depth (C): 75 mm (incl. valve/control)
Min. possible usable height (D): approx. 105 mm (upper edge of seat clamp to lower edge of saddle frame, extended)
max. possible usable height (E): 275 mm (upper edge of seat clamp to lower edge of saddle frame, extended)
Offset: 0mm
Compatibility seat stays: round (7x7 mm) and oval (up to 7x10 mm)
Functionality: pneumatic, closed cartridge
Features: 2-bolt saddle mount
max. system weight: not specified
Color: Black
Weight according to the manufacturer: 395g
Weight weighed: 402g
Scope of delivery:
1x ENVE Seatpost G Series Alloy Dropper Post 27.2 mm x 350 mm | 40mm
1x 30.6 mm reducing sleeve (80 mm length)
1y 31.6mm reducing sleeve (80mm length)
1x set Bowden cable/case
WITHOUT remote lever
Note: The internally controlled seat post ensures a tidy look on your bike. Please make sure that your frame allows the installation of seat posts with internal cable routing.