EASTON wheelset 29 "HAVEN 29 AM
The Haven 29 "comes with an aluminum rim with 21 millimeters inner width therefore. Just right by up to 2.5 inches wide all-mountain tires to give optimal grip even with low air pressure. The highlight of the wheelset is the possibility it without installing a rim strip Tubeless drive can. this is made possible Easton threaded eyelet and nipple system. Specially manufactured nipples with external threads are screwed into the rim eyelets, enabling a closed rim bottom without spoke holes. the nipples can still be assembled using standard tools and trued.
The wheelset is Built with Easton's highend M1 hubs and Sapim spokes. With industrial bearings sealed the hubs are extremely insensitive. That you even after years of hard use yet optimal running Easton wheelset round, all wheelsets are consuming spoked by hand at Easton.
To adjust each bike are the M1 hubs on all common axle standards convertible and a Sram XD freewheel for Sram XX1 and X01 group is optionally available.
intended use: All Mountain
Size: 29 "
Wheels Type: Clincher, UST tubeless
Rim height: 21 mm
Internal width rim: 21 mm
External width rim: 26 mm
Spokes: Sapim straight-pull
Lacing: 24 spokes, 3 times crossed
Front Hub: 15 x 100 mm or 20 x 110 mm thru-axle
Rear Hub: 10 x 135 mm or 12 x 135/142 mm,
Recovery type: 8-, 9-, 10-speed Shimano | SRAM, SRAM XD freewheel optional (not included)
Weight: 1785g (manufacturer)