The French manufacturer Duke has his program extended to this 380 / 430g lightweight MTB Carbon Clincher rim for supporters of the 'Big Wheels'. Visually appealing, but also in the technical data needs this rim, given the relatively low price compared with the higher-priced products not fear. Designed for cross country on Tour- to AllMountain use. With its 25 mm inner width rims and wide tires provide a perfect support width, which makes it possible to keep the tire pressure low. The grip level of the tire thereby increases significantly.
The wheels are provided with an asymmetrical rim profile, which requires a more uniform pitch angle of the spokes. This optimization of the spoke angle brings a number of advantages. The spoke tension on both sides can be better matched to one another, what is the shelf life of the spokes and the entire impeller conducive. The normally directional lateral stiffness is also adjusted so that the wheel appear rigid in itself.
As a further optimization, the rim has nipple seats inside liegene nipples. These involve considerably smaller spoke holes in the rim, and thus a lower weakening of the rim at this location. Further, the constitution provides with internal nipples a clean look. To the system weight of
Keep wheelset as low as possible, the wheels are specifically designed for front and rear.
Necessary material is precisely where it is needed most. The decals / stickers are not painted and can be removed without a trace.
We will submit an offer for a complete custom wheelset with hub and spokes of their choice. Please send us an email to email@example.com !
A selection of preconfigured impellers are available in our overview .
Rim type: Clincherfelge for wire and folding
Maximum spoke tension: 1050N
Rim height: 28 mm
Wheel width: 32 mm
Inner rim width: 25 mm
Number of holes: 32
Tire pressure: max. 3 bar
Rider weight limit (including clothing and luggage.): 100 kg (Cross Country) 90 Kg (All Mountain)
Weight: 380g (front), 430g (rear)