DT SWISS Wheelset 29 "M 1700 Spline Two
The DT Swiss Spline wheels are built from the best ingredients of the Swiss tradition manufactory. With modern rim profiles combined with a wide inner width in a light package, they have the features required on the trail. With proven hub life and high feed-in quality, the Spline wheel sets are beyond doubt in terms of durability and robustness. With its rugged 22.5 millimeter inner rim, the M 1700 is an all-mountain wheel set with a very good price / performance ratio. The wheel set is supplied with a wide range of accessories (see scope of delivery).
With the modular design, the spline hubs can be converted to any standard axle type standard without tools. Likewise, most maintenance work and the insertion of another rotor without a special tool is possible. The proven toothed disc freewheel with 18 teeth provides the typical DT Swiss Nabensound. In this type of freewheel, the force is transferred very evenly onto the impeller, which makes it virtually indestructible.
The M 1700 wheels are also available in versions for frames and forks with BOOST standard. By a wider distance of the hub flanges a flatter spoke angle is realized with BOOST hubs, whereby the wheels become stiffer. This is particularly noticeable in the case of large-diameter and rough-terrain bikes.
All rims of the spline wheel sets are equipped with a tubeless compatible profile. Thus, only tubelesstape has to be glued in and the included Tubeless valves have to be used and the Spline wheel set is ready for tubeless use. Stands for Pro Head Reinforcement System, where the nipple and rim form a kind of ball joint. This ensures a more flat contact surface between the nipple and the rim, which makes the nipple easier to align. Thus the spokes always stand at the right angle to the rim and the forces can be transferred better. The DT Squorx nipples have a Torx mount on the underside, which provides a better tool mount for more precise centering. On the outside, however, the Squorx nipples can still be tightened with a standard standard nipple wrench.
The spline wheel sets are built with straight spull spokes only. This ensures a very high stiffness in the impeller and the elimination of the sensitive spoke bow for a very long durability. This reduces the overall weight of the impeller set and increases the durability of the spokes.
PHR nipple system
intended use : XC Allround, All Mountain, Trail, Enduro
Material rim: aluminum
Wheel Size: 29 "
Rim type: Clincher (suitable for folding and wire)
Tubeless capable: yes
Outside width rims: 27 mm
Internal width rims: 22.5 mm
axle type forward: 9x 100 mm quick release (Umrüstkit included), 15x 100 mm slot axis, 15x 110 mm Predictive Steering or 15x 110 mm slot axis BOOST
Rear axle type : 12x 142 axle (10x 135 mm quick release trailer conversion kit included) or 12x 148 mm axle axle BOOST
Front brake disc mount: center lock (6-hole adapter included) or 6-hole (Predictive Steering front wheel)
Rear disc brake: Centerlock (6-hole adapter included)
Free-float: 9-, 10-, 11-speed Shimano | 9-, 10-speed SRAM or SRAM XD
Freewheel type: toothed disc freewheel, 18 detent points per wheel revolution
Spokes: DT Competition | Straightpull
Infeed: triple crossed 28 hole
Maximum recommended driver weight: 110 Kg (driver including clothing)
Weight: from 1785g (manufacturer's data)
Delivery includes: front wheel and rear wheel, tubeless valves, 1x Tubeless Ready Tape, 2x Centerlock / 6-hole adapter (1x with Predictive Steering front wheel), conversion kit 9x 100 mm including 5 mm quick release (only with 15x 100 mm front wheel), conversion kit 10x 135 mm Including 5 mm quick release (not for BOOST rear wheels)
For more information, click here .