DT SWISS suspension fork 29" F 232 One 120 mm Crown Adjust tapered BOOST black 44 mm offset
In order to manufacture a competitive product, all requirements for the respective application must be met. DT Swiss has always done this with Swiss precision and a sense for unique quality.
However, you have to do more to achieve holistic performance. DT Swiss has redefined the key factors for cross country riding and taken them to the next level to give you the ultimate suspension fork.
Cross country is constantly evolving, the descents are getting steeper, the climbs more technical and artificial obstacles such as rock gardens, berms and drops place significantly higher demands on man and material. The F 232 ONE was developed precisely for these challenges: the LINEAIR suspension system, specifically optimized for XC, lets you float over root carpets and offers the right progression to take the big hits. A fork design inspired by nature places the material exactly where the forces are greatest, setting new standards in terms of stiffness/weight ratio.
The three-stage adjustment of the INCONTROL damping in riding mode offers you the perfect compression damping for every situation: LOCK for sprints, DRIVE for technical climbs and the OPEN mode allows you to leave the brakes open for downhill riding.
INCONTROL
With Incontrol, DT Swiss provides a platform that can be adjusted in three stages. Open mode gives you maximum sensitivity and traction. The slightly higher compression damping in Drive mode guarantees you efficient propulsion in the terrain and Lock lets you master the approach to your favorite trail in a new best time.
LINEAIR
The large volume of the positive and negative air chambers is the key to the linear spring curve, which is also responsible for the counter pressure in the mid-travel. An air bypass automatically balances the air suspension system of the F 232 ONE fork.
APT
The APT (Adaptable Progression Tune) system allows the progression of the spring curve to be adjusted by simply adding or removing one or more volume spacers in the air chamber of the suspension fork. This allows the rider to adapt the spring characteristic to their riding style and trails. The highlight: the response always remains sensitive regardless of the selected setup.
Two-in-one remote lever
DT Swiss allows you to lock the suspension fork from the handlebars. This gives you the option of adapting your suspension to the given conditions in a flash via the 2-stage control.
Technical data:
Range of use: Cross Country, Marathon
E-bike ready: no
Wheel size: 29"
Material fork crown/stem: aluminum / aluminum
Material stanchions/Ø: Aluminium, black anodized / 32 mm
Material down tubes: Magnesium cast alloy
Axle standard: 15x110 mm BOOST thru axle
Steerer tube: 1.5" to 1 1/8" tapered
Steerer tube length: 230 mm
Suspension travel: 120 mm
Suspension system: Lineair
Adjustment of the spring characteristic: yes, via spacers (APT system)
Damping: Incontrol
Lockout: 3-stage (Open, Drive, Lock) adjustable via remote lever
Installation height: 527 mm
Brake mount: Postmount PM6 (160 mm)
Max. permissible brake disk size: 203 mm
max. system weight: 130 kg System weight: 130 kg
ASTM classification: ASTM 3
Max. tire diameter: 750 mm
Max. tire width: 73 mm / 2.5" (with max. 720 mm tire diameter)
Offset: 44 mm
Color: black, matt
Weight according to manufacturer: 1510 g (without thru axle)
Weight as weighed: 1600 g (incl. thru axle and remote lever) thru axle and remote lever)
Scope of delivery:
1x DT SWISS suspension fork 29" F 232 One 120 mm Two in One Remote tapered BOOST black 44 mm offset
1x DT SWISS Two-in-One remote lever
1x DT SWISS 15 x 110 mm Boost thru axle
1x mudguard
1x APT kit (volume spacer)
1x Ahead fork claw
2x brake hose holder
DT SWISS Dropper Post D 232 One Carbon 27,2 mm | 60 mm | L1 Remote Leveravailable from stock
DT SWISS Dropper Post D 232 One Carbon 30,9 mm | 60 mm | L1 Remote Leveravailable from stock
SHIMANO Ultegra | XT Chain CN-HG701 11-speed | 116 Links with Chain Connectoravailable from stock
