DT SWISS suspension fork 29 "F 232 One 120 mm Crown Adjust tapered BOOST black 51 mm offset
In order to produce a competitive product, all requirements for the respective application must be met. DT Swiss has always done this with Swiss precision and a sense of unique quality.
To achieve holistic performance, however, you have to do more. DT Swiss has redefined the key factors for cross country riding and taken them to the next level to give you the ultimate suspension fork on your way.
Cross Country is constantly developing, the descents are becoming steeper, the counter-climbs of technical and artificial obstacles such as rock gardens, berms and drops place significantly higher demands on people and equipment. The F 232 ONE was developed precisely for these challenges. The LINEAIR spring system, specifically optimized for XC, lets you float over root carpets and offers the right progression to take the big hits. A fork shape inspired by nature places the material exactly where the forces are greatest, setting new standards for the stiffness / weight ratio.
The three-stage adjustment of the INCONTROL damping while driving offers you the perfect pressure level for every situation: LOCK for sprints, DRIVE for technical climbs and the OPEN mode allows you to keep the brakes open when downhill.
With Incontrol, DT Swiss provides a platform that can be set in three stages. In open mode you have maximum sensitivity and traction. The slightly higher compression damping in drive mode guarantees you efficient propulsion in the field and Lock allows you to master the approach to your favorite trail in a new record.
The large volume of the positive and negative air chambers is the key to the linear spring curve, which is also responsible for the counter pressure in the mean spring travel. An air bypass automatically balances the air suspension system of the F 232 ONE fork.
The APT (Adaptable Progression Tune) system allows the progression of the spring characteristic to be adjusted by simply adding or removing one or more volume spacers in the air chamber of the suspension fork. This allows the biker to adapt the spring characteristics to his riding style and to his trails. The highlight: The response behavior always remains the same sensitive regardless of the selected setup.
Two in one remote lever
DT Swiss enables the suspension fork to be blocked from the handlebar. So you have the opportunity to adjust your suspension to the given conditions in a flash using the 2-stage control.
intended use : Cross Country, Marathon
E-bike ready: no
Wheel size: 29 "
Material fork crown / shaft: aluminum / aluminum
Material standpipes / Ø: aluminum, black anodized / 32 mm
Immersion tubes material: Magnesium cast alloy
axle type : 15x110 mm thru-axle BOOST
Steerer: 1.5 "to 1 1/8" tapered
Steerer tube length: 230 mm
Suspension travel: 120 mm
Spring system: Lineair
Adjustment of the spring characteristic: yes, via spacer (APT system)
Lockout: 3-stage (Open, Drive, Lock) adjustable on the remote lever
Installation height: 527 mm
Brake mount: Postmount PM6 (160 mm)
Max. permissible brake disc size: 203 mm
Max. System weight: 130 kg
ASTM classification: ASTM 3
Tire diameter max .: 750 mm
Tire width max .: 73 mm / 2.5 "(with max. 720 mm tire diameter)
Offset: 51 mm
Color: black, matt
Weight according to the manufacturer: 1510g (without thru axle)
Weight weighed: 1509g (without thru axle)
Scope of delivery:
1x DT SWISS suspension fork 29 "F 232 One 120 mm Two in One Remote tapered BOOST black 51 mm offset
1x DT SWISS Two-in-One remote lever
1x DT SWISS 15 x 110 mm Boost thru axle
1x APT kit (volume spacer)
1x Ahead fork claw
2x brake line holder
Manuals / DownloadsAPT Volume Spacer Manual