DT SWISS Hub rear 240s Straightpull Non Disc for Quick Release | Freehub Shimano 11-speed Road
DT SWISS Hub rear 240s Straightpull Non Disc for quick release | Freewheel Shimano 11-speed Road
Switzerland is known for good chocolate, first-class cheese and miracles of precision mechanics. The attention to detail that brings these products can also be found in the DT Swiss 240s hubs. Above all, the love of mechanics can be easily determined. The tried and tested toothed belt with 18 teeth is extremely reliable and hardly has to shy away from the comparison to the famous Swiss movement. The bearing technology with 2 bearings each for freewheel body and hub body is adapted to the loads occurring. The labyrinth sealing system, along with sliding sealing washers and bearing rings made of stainless steel, ensure a long service life.
DT Swiss constantly improves its own products. The goals are extreme reliability and, of course, lightweight construction. In the mechanics of the hubs, however, the development department reached its limits. Lighter with consistent reliability seems hardly possible. As potential for improvement, however, the spoke flanges were identified. By using straight spokes - Straightpull - the load of the spokes is lowered and the risk of spoke breaks is reduced to a minimum!
Material hub body: aluminum Material toothed washers: steel Freewheel: 9, 10, 11-speed Shimano | SRAM Freewheel toothing: every 20 ° (18x per revolution) axle type : 5x130 mm quick release Number of holes: 24 holes Color: black with red decals
Spoke hole diameter: 2.5 mm Spoke hole circle diameter left: 39 mm Spoke hole circle diameter right: 46 mm Flange distance: 49.3 mm Flange distance left: 33.3 mm Flange distance right: 16 mm