DT SWISS hub rear 240s straightpull disc 6-hole for 12x142 mm thru axle | Freewheel Shimano | SRAM
Switzerland is known for good chocolate, first-class cheese and miracles of precision mechanics. The attention to detail that brings these products can also be found in the DT Swiss 240s hubs. Above all, the love of mechanics can be easily determined. The tried-and-tested toothed belt freewheel, which is toothed with 18 teeth, is extremely reliable and hardly needs to shy away from the Swiss watch movement. The bearing technology with 2 bearings each for freewheel body and hub body is adapted to the loads occurring. The labyrinth sealing system, along with grinding discs and bearing rings made of stainless steel, ensure a long service life.
DT Swiss constantly improves its own products. The goals are extreme reliability and, of course, lightweight construction. In the mechanics of the hubs, however, the development department reached its limits. Lighter with consistent reliability seems hardly possible. As potential for improvement, however, the spoke flanges were identified. By using straight spokes - Straightpull - the load of the spokes is lowered and the risk of spoke breaks is reduced to a minimum!
The DT Swiss 240s rear hubs can be converted to all standard axle type s.
Material hub body: aluminum Material toothed washers: steel Freewheel: Shimano MTB 9-, 10-, 11-speed | Sram 9-, 10-speed Freewheeling: every 20 ° (18x per revolution) Axle system: 12x142 mm thru axle Brake mount: 6-hole Number of holes: 28 Color: black with red decals
Spoke hole diameter: 2.5 mm Spoke hole circle diameter left: 38.5 mm Spoke hole circle diameter right: 45.5 mm Flange distance: 53.2 mm Flange distance left: 33 mm Flange distance right: 20.2 mm