DT SWISS Hub rear 240s Straightpull Disc Center Lock for Quick Release | Freehub Shimano | SRAM
DT SWISS hub rear 240s Straightpull Disc Center Lock for quick release Freilauf Shimano SRAM
Switzerland is known for its fine chocolate, first-class cheese and wonders of fine mechanics. The attention to detail that these products produce can also be found in the DT Swiss 240s hubs. Above all, love for mechanics can be easily ascertained. The tried and tested toothed disc freewheel with 18 teeth is extremely reliable and must hardly shy away from the comparison with the Swiss movement. The bearing technology with 2 bearings each for freewheel body and hub body is adapted to the loads that occur. The labyrinth seal system together with abrasive sealing discs and bearing rings made of stainless steel ensure a long durability.
DT Swiss is constantly improving its own products. The goals are extreme reliability and, of course, lightweight construction. In the mechanics of the hubs, however, the development department reached its limits. Lighter with the same reliability seems hardly possible. However, as a potential for improvement, the spoke flanges were made. By using straight straight - straightpull - the load on the spokes is reduced and the risk of spike breaks reduced to a minimum!
The DT Swiss 240s rear wheel hubs can be retrofitted to all common axle type standard s.
Material Hub body: Aluminum Material Toothed discs: Steel Freewheel: Shimano MTB 9-, 10-, 11-speed Sram 9-, 10-speed Freewheel toothing: every 20 ° (18x per revolution) axle type : 5x135 mm quick release Braking: Center Lock Number of holes: 28 Color: black with red decals
Spoke hole diameter: 2.5 mm Spoke hole diameter left: 38.5 mm Spoke hole diameter right: 45.5 mm Flange spacing: 53.2 mm Flange spacing: 33 mm Flange spacing right: 20.2 mm