DT SWISS hub rear 240s Straightpull Disc Center Lock for BOOST | 12x148 mm thru axle | Freewheel Shimano | SRAM
Switzerland is known for good chocolate, first-class cheese and miracles of precision engineering. The attention to detail that these products produce can also be found in the DT Swiss 240s hubs. Above all, the love of mechanics is easy to determine. The tried and tested, with 18 teeth fine toothed pulley freewheel is extremely reliable and hardly has to shy away from the comparison to the Swiss clockwork. The bearing technology with 2 bearings for the freewheel body and the hub body is adapted to the loads that occur. The labyrinth sealing system together with the grinding seals and bearing rings made of stainless steel ensure a long service life.
DT Swiss is constantly improving its own products. The goals are extreme reliability and, of course, lightweight construction. However, the development department reached its limits when it came to the mechanics of the hubs. Lighter with the same level of reliability hardly seems possible. However, the spoke flanges were identified as potential for improvement. By using straight spokes - Straightpull - the load on the spokes is reduced and the risk of spoke breaks is reduced to a minimum!
The DT Swiss 240s rear wheel hubs can be converted to all common axle type standards.
Hub body material: aluminum
Toothed pulley material: steel
Freewheel: Shimano MTB 9-, 10-, 11-speed | Sram 9-, 10-speed
Freewheel toothing: every 20 ° (18x per revolution)
axle type : 12x148 mm thru-axle Boost
Brake mount: Center Lock
Number of holes: 28
Color: black with red decals
You can find detailed operating instructions here .