shipping country:
    header image

    DT SWISS Hub rear 240s Straightpull Disc Center Lock for 12x142 mm Thru Axle | Freehub Shimano 11-speed Road

    Item no.:

    Product weight:220g
    DT Swiss
    237,50 € UVP: 309,00 €
    You save 23,14 %, that is 71,50 €
    including 19% VAT. excl. Shipping costs
    • available from stock
    Hole Number

    Article details

      DT SWISS hub rear 240s straightpull disc center lock for 12x142 mm Freilauf Shimano 11-speed Road

      Switzerland is known for its fine chocolate, first-class cheese and wonders of fine mechanics. The attention to detail that these products produce can also be found in the DT Swiss 240s hubs. Above all, love for mechanics can be easily ascertained. The tried and tested toothed disc freewheel with 18 teeth is extremely reliable and must hardly shy away from the comparison with the Swiss movement. The bearing technology with 2 bearings each for freewheel body and hub body is adapted to the loads that occur. The labyrinth seal system together with abrasive sealing discs and bearing rings made of stainless steel ensure a long durability.

      DT Swiss is constantly improving its own products. The goals are extreme reliability and, of course, lightweight construction. In the mechanics of the hubs, however, the development department reached its limits. Lighter with the same reliability seems hardly possible. However, as a potential for improvement, the spoke flanges were made. By using straight straight - straightpull - the load on the spokes is reduced and the risk of spike breaks reduced to a minimum!

      The DT Swiss 240s rear wheel hubs can be retrofitted to all common axle type standard s.

      Technical specifications:

      Material Hub body: Aluminum
      Material Toothed discs: Steel
      Freilauf: 9, 10, 11-speed Shimano | SRAM
      Freewheel toothing: every 20 ° (18x per revolution)
      axle type : 12x142 mm thru axle
      Braking: Center Lock
      Number of holes: 24 or 28
      Color: black with red decals

      Weight: 220g (manufacturer's specification)

      Scope of delivery: 1x hub, 1x spacer ring for 10-speed

      flange geometry:

      Spoke hole diameter: 2.5 mm
      Spoke hole diameter left: 38.5 mm
      Spoke hole diameter right: 45.5 mm
      Flange spacing: 53.2 mm
      Flange spacing: 33 mm
      Flange spacing right: 20.2 mm

      You can find a detailed instruction manual here .

      Note: The hub comes without a center lock adapter!

      Other customers have also bought the following items