DT SWISS rear hub 240s Hybrid Disc 6-hole for 12x148 mm BOOST thru axle | Freewheel Shimano | SRAM
Hubs from DT Swiss enjoy the reputation of being almost indestructible. Thanks to high-quality industrial bearings made of stainless steel and effective seals, the 240s are the source of this reputation. Just unpack, install in the bike and forget. The hubs are designed to be extremely user-friendly, so there is no need to adjust the bearing clearance and the maintenance intervals are only required at very long intervals. Should service be necessary after tens of thousands of kilometers, thanks to the DT Swiss plug-in system, the hubs can be disassembled and maintained within a few minutes without special tools. The tried and tested flange geometry forms the perfect basis for durable and stiff wheels.
The hybrid version has been specially developed for use on e-bikes. For expedition bikes and for those who want a nearly indestructible wheelset, the hybrid hubs are also the best choice. Compared to the standard version, they have an oversized housing, a heavy-duty axle and extra-reinforced spoke mounts. Oversized bearings additionally ensure high robustness and durability. The proven DT-Swiss toothed disc freewheel is also made of hardened steel on the hybrid hub and has been extended to 24 teeth for a more direct response. Through these adjustments, the larger torques of e-bike drives can be absorbed by the hub. Despite these adjustments brings the 240s hybrid hub only a very small extra weight compared to a standard MTB hub on the scales.
intended use : E-bike, expedition, All Mountain, Enduro
Material: aluminum, steel
bearing : 2x oversized industrial bearings
Seal: labyrinth rubber seals
Spoke type: J-bend spokes
Spoke tension: 1200N
Freewheel: Shimano MTB 9-, 10-, 11-speed | Sram 9-, 10-speed
Freewheel Type: Pulley Freewheel
Freewheeling: every 15 ° (24x per revolution)
axle type : 12x148 mm BOOST floating axle
Number of holes: 32 or 36 holes
Brake disc holder: IS 2000 6-hole
Color: black with gray decals
Weight: not specified by the manufacturer
A detailed instruction manual can be found here .
Scope of supply: 1x DT SWISS 240s Hybrid Disc rear hub 6-hole for 12x148 mm BOOST thru axle | Freewheel Shimano | SRAM