header image

    DT SWISS Hub front 350 Big Ride Disc Centerlock 15x150 mm Thru Axle

    Item no.:
    16686

    Product weight:174g
    Manufacturer:
    DT Swiss
    67,50 €
    UVP: 92,90 €
    You save 27,34 %, that is 25,40 €
    including 19% VAT. excl. Shipping costs
    • available from stock

    Article details

      DT SWISS hub front 350 Big Ride Disc Centerlock 15x150 mm thru axle

      Hubs from DT Swiss enjoy the reputation of being almost indestructible. And not without reason. Thanks to high-quality industrial bearings made of stainless steel and effective seals, DT Swiss hubs are in fact significantly more resistant than most competitors on the market. Just unpack, install in the bike and forget. The 350 hubs are also extremely user-friendly, so no clearance has to be set and the maintenance intervals are needed, if at all, only at long intervals. Should service be necessary after tens of thousands of kilometers, thanks to the DT Swiss plug-in system, the hubs can be disassembled and maintained within a few minutes without special tools. The tried and tested flange geometry forms the perfect basis for durable and stiff wheels.

      The 350 Big Ride hubs from DT Swiss are specially designed for Fat Bikes, as the larger cross sections of the tires also require wider forks and thus larger paving widths. In order to easily put away the higher loads, the axle and the bearings were made much larger!


      Technical specifications:

      Material: aluminum
      Brake Disc Mount: Centerlock
      axle type : 15 x 150 mm thru axle
      bearing : 2x industrial bearing made of steel
      Number of holes: 32
      Spacing pattern: crossed only
      Spoke tension: 1200N
      Color: black with white decals

      Weight: 174 g (manufacturer)

      Note: Illustration similar!

      INFO: DT Swiss 350 front hubs, which are designed for a 15 mm rear axle system (QR15), have no through axle inside the hub body. This means that the ball bearings directly on the 15 mm thru axle - which
      the impeller connects to the fork. For this reason, most tuning thru axles (eg Carbon Ti, Shift Up, Extralite, etc.) can not be used with this type of hub. All tuning thru axles, which are externally butted in the middle part, are not suitable because the ball bearings can not be supported on the thru axle.



      Product weight:174g

      Other customers have also bought the following items

      Top