DT SWISS hub front 180 Carbon Ceramic Non disc for quick release
Following the motto never change a running system Dt Swiss has its high-end only slightly revised the hub 180 series for model year 2015 and added variants for all common axle and freewheel standards. Same is the minimalist weight with extremely high stiffness, which is achieved by a central part of unidirectional carbon on the hub body. The stiffness at the hub body is used, the load on the spokes evenly distribute. Driving and braking forces are transmitted better from both Speichenflanschen on all spokes. Unilateral load peaks are prevented what hub, spokes and rim saves.
DT Swiss hubs stand for easiest installation and highest reliability. The latter is achieved with the 180 hub with smooth, durable hybrid ceramic bearings. Through the use of expensive seals and the loads customized bearing sizes the hubs do not require adjusting the bearing clearance. So the driver has to worry about the function of the hub over the years! If, after tens of thousands of kilometers it out a service be necessary, the hubs can be thanks to the DT Swiss plug system dismantled and serviced within minutes without special tools.
NOTE: Non Disc quick release version of the front hub is not convertible for use with quick-release axles.
Material: Carbon hub shell, aluminum flanges
Achsstandard: 5x100 mm quick release
bearing: 2x hybrid ceramic cartridge bearings
Spoke tension: 1200N
Number of holes: 20, 24 or 28 or hole
Colour Hub: black, UD Carbon
Color Decals: white
Weight: 100g (manufacturer)
A detailed user manual you can find here